i have a vr4 motor wich i will be using in my lancer with the KM210 gearbox. i been told i need a flywheel from a FWD turbo US DSM. can anyone confirm this and more importantly will this flywheel fit? apparently the stock lancer ring gear dont reach the starter.
Eclipse 89-92 2.0L T 6-Bolt FWD
this is from the fidanza catalogue which does not list a VR4 galant
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 28 November 2006 - 09:50 AM
purple91gsr
-
- Active Members
-
- 28 posts
Member
- LocationRegional NSW Australia
1993 Galant (6A12)
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
Back to top
#2
Posted 28 November 2006 - 10:05 AM
Mr Gears
-
- Active Members
-
- 150 posts
Member
- LocationSeven Hills NSW
#3
Posted 28 November 2006 - 10:41 AM
jett
-
- Active Members
-
- 175 posts
Member
- LocationTownsville
Or an AB/AC Turbo Cordia Flywheel and the VR4 starter...
-Lancer VR4-
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
#4
Posted 28 November 2006 - 10:51 AM
purple91gsr
-
- Active Members
-
- 28 posts
Member
- LocationRegional NSW Australia
the sonata the gearbox comes from is a 2.4 which would make it a 4g69 (i think)
i am going for a new clutch and i want an aluminium flywheel if possible, i just don't know which one matches.
i am going for a new clutch and i want an aluminium flywheel if possible, i just don't know which one matches.
1993 Galant (6A12)
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
#5
Posted 28 November 2006 - 11:37 AM
3zercrowd
-
- Administrators
-
- 8,388,607 posts
Donating Member
- LocationTownsville
[quote name='"purple91gsr"']the sonata the gearbox comes from is a 2.4 which would make it a 4g69 (i think)
quote]
4G64
quote]
4G64
QUOTE OF THE YEAR>>> BTW... does anyone else have a sore ass??
Dane/Lancer GSR
[email protected]!!!
STILL Needs more Kilowatts!
Members rides> http://4gtuner.com/s...read.php?t=1910
#6
Posted 28 November 2006 - 10:55 PM
jett
-
- Active Members
-
- 175 posts
Member
- LocationTownsville
Earlier sonata's were 4G63's - thats the model you want the flywheel from...
-Lancer VR4-
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
#7
Posted 29 November 2006 - 11:43 AM
purple91gsr
-
- Active Members
-
- 28 posts
Member
- LocationRegional NSW Australia
Earlier sonata's were 4G63's - thats the model you want the flywheel from...
i have heard so many different things, it is drivin me mad!!
i was originally going off this: http://www.members.o...nzo/tranny.html
but i just don't know who to believe.
anyway i have the box and may well be able to get hold of an AB AC turbo cordia flywheel so i am thinking i will check if that fits then ring fidanza with the measurements etc to check against the FWD eclipse flywheel..............unless somebody can give me a straight answer with somthing to back it up.
i can't believe everything i hear obviously, and $600 isn't the sort of money i would like to spend without being sure about it!
1993 Galant (6A12)
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
1991 GSR 3 Door (4G63T)
2004 P!nK Sedan (4G94) Sold
1994 CC 5 Door (4G15) Sold
#8
Posted 29 November 2006 - 11:49 AM
jett
-
- Active Members
-
- 175 posts
Member
- LocationTownsville
I am running the cordia flywheel on my VR4 engine with the FWD gearbox from the 4G93 n/a CC lancer - using the factory VR4 starter motor.
I can guarantee that it works and has been for a year...
Cost me $50 for the fly, PP and clutch disc.... (that clutch didn't last long though LOL)
Basically you need a flat (no step) flywheel - same as the one which originally came with the gearbox - But with a 6 bolt pattern.
Personally i think spending $600 on a flywheel is pointless - even more so if you don't remove the balance shafts...
Depends on what sort of car you are building though - for the street or weekend track work - don't bother... IMO..
If anything remove the balance shafts and machine some meat out of the cordia fly...
I can guarantee that it works and has been for a year...
Cost me $50 for the fly, PP and clutch disc.... (that clutch didn't last long though LOL)
Basically you need a flat (no step) flywheel - same as the one which originally came with the gearbox - But with a 6 bolt pattern.
Personally i think spending $600 on a flywheel is pointless - even more so if you don't remove the balance shafts...
Depends on what sort of car you are building though - for the street or weekend track work - don't bother... IMO..
If anything remove the balance shafts and machine some meat out of the cordia fly...
-Lancer VR4-
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
CC Lancer Sedan
4G63T - 1st Gen
FMIC
Adaptronic 420b ECU with custom install and tune
2.5" Turbo Back Mandrel Exhaust
Lightened Flywheel
#9
Posted 29 November 2006 - 01:03 PM
Mr Gears
-
- Active Members
-
- 150 posts
Member
- LocationSeven Hills NSW
i have heard so many different things, it is drivin me mad!!
i was originally going off this: http://www.members.o...nzo/tranny.html
but i just don't know who to believe.
All the info is correct (though the Cordia stuff is not relevant to the KM210)
I am running a 225mm VR4 clutch plate with my KM210 (I am not using the VR4 pressure plate because my flywheel is flat...sort of)
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
