Hey Guys,
Broke my rear drive shaft at the drags tonight
It snapped where it goes into the transfer case. Looks like the spline on the prop and in the transfer case have been damaged.
Anyone had this happen before and know about potential cost? I've a feeling I'm going to be poor
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 14 January 2007 - 05:53 AM
RSEA
-
- Active Members
-
- 133 posts
Member
Back to top
#2
Posted 14 January 2007 - 10:01 AM
RSEA
-
- Active Members
-
- 133 posts
Member
so no ones done this before?
no one knows if I'll need a new transfer case?
no one knows if I'll need a new transfer case?
Rob.
JDM Tommi Mak
JDM Tommi Mak
#3
Posted 14 January 2007 - 07:48 PM
Lee
-
- Active Members
-
- 302 posts
Advanced Member
- LocationTownsville
I Rob, I thought that you broke a front shaft (L/R), so it's the big middle drive shaft that goes to the read diff?
Is there any dammage to the transfer case? (That you can tell)
Where did it snap? shouldn't cost much if it just broke at the uni-joint and did no other damage.
Might help to post up some pic's
Good luck with it all mate.
Is there any dammage to the transfer case? (That you can tell)
Where did it snap? shouldn't cost much if it just broke at the uni-joint and did no other damage.
Might help to post up some pic's
Good luck with it all mate.
*Black EVOLUTION III*~12.0@114mph~ SOLD
*Eisen Grey Evolution VII*Too many mods 12.89@106mph (FOR SALE)
*07 Ralliart Colt* (Wife's car)14.8@96mph Few mods
*Eisen Grey Evolution VII*Too many mods 12.89@106mph (FOR SALE)
*07 Ralliart Colt* (Wife's car)14.8@96mph Few mods
#4
Posted 14 January 2007 - 08:40 PM
RSEA
-
- Active Members
-
- 133 posts
Member
yeh the uni joint where it goes into the transfer case is what snapped. I couldn't see any damage to the transfer other than the spline that comes out of it was snapped
Rob.
JDM Tommi Mak
JDM Tommi Mak
#5
Posted 15 January 2007 - 05:14 AM
3zercrowd
-
- Administrators
-
- 8,388,607 posts
Donating Member
- LocationTownsville
NQ drive shafts 47253433 OR
Townsville CV shafts 47799744
These guys might be able to help Rob.
If not second hand or Genuine parts for you.....
Townsville CV shafts 47799744
These guys might be able to help Rob.
If not second hand or Genuine parts for you.....
QUOTE OF THE YEAR>>> BTW... does anyone else have a sore ass??
Dane/Lancer GSR
[email protected]!!!
STILL Needs more Kilowatts!
Members rides> http://4gtuner.com/s...read.php?t=1910
#6
Posted 15 January 2007 - 05:35 AM
RSEA
-
- Active Members
-
- 133 posts
Member
#7
Posted 15 January 2007 - 07:26 AM
CLuTZ
-
- Active Members
-
- 12,121 posts
Diamonds are forever....
- LocationMelbourne VIC
It might be easier/cheaper to get a second hand front driveshaft.........
I've broken 2x right rears in my old VR4 from launching
I've broken 2x right rears in my old VR4 from launching
#8
Posted 15 February 2007 - 12:46 PM
RSEA
-
- Active Members
-
- 133 posts
Member
for reference it ended up being a $550 repair
broke the yoke, uni and seal. Took about a week to fix
ppl should probably consider stuff like this before upgrading to heavier clutches
broke the yoke, uni and seal. Took about a week to fix
ppl should probably consider stuff like this before upgrading to heavier clutches
Rob.
JDM Tommi Mak
JDM Tommi Mak
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
