52 replies to this topic

[Advanced Jap]

GK Sigma VR4 4G63
OLD SETUP
Stock internals
Wolf 3d version 4.0
Gizzmo EBC
510cc Injectors
Malpassi fuel reg
Bosch 600hp fuel pump
Stainless Surge tank ( AJAI )
Carter Lift pump
Custom intake plenum ( AJAI )
Custom exhaust manifold
Ecothemo cooling system ( John Bennett Eco Trans & AJAI )
T04 /T03 Turbo (Max Heywood ATS )
V2 trim compressor (Max Heywood ATS )
Stage 3 turbine wheel (Max Heywood ATS )
3 inch mandrel exhaust
Custom 500 x 400 x 75 tube fin intercooler ( AJAI )
3 inch intercooler piping ( AJAI )
65 mm throttle body
W58 late model supra gearbox
Genuine C'S short shift
Custom tailshaft
VP Diff custom shortened 3.9 mini spool ( Hugo Raceglides)
15 x 9 x 26 hoosier slicks

E.T 12.13 @112 mhp



Coming soon New Set Up
Garrett GT3582R 1.06 housing 700hp roller (power ported)
4G63 block o-ringed
forged JE pistons 20 thou over
Ishihara-Johnson Scrapper
Custom argo rods
Arp Head Studs
Arp Main Studs
Arp 7/16 Rod Bolts
PFI Fuel Rail
Jay Racing Alternator Relocation Kit
flowcraft ported cylinder head
BC Valve Springs
Titanium retainers
Ferrea Comp Plus 1mm Oversize Valves
Ecothemo cooling system ( John Bennett Eco Trans & AJAI )
HKS 288 cams & Valve Spring Set
BLE Solid lifters
Tomei cam gears
870cc bosch injectors
huge custom intake plenum
Custom Exhaust manifold power ported (andrew sanders)
Turbosmart 50mm wastegate
70mm throttle body
Motec M400 Fully Unlocked
w58 supra gearbox
Extreme Cermaic Cussion button Clutch 2800lbs
Chrome Moly Flywheel
Genuine C'S short shift
Custom tailshaft
VP Diff custom shortened 3.9 mini spool ( Hugo Raceglides)
15 x 9 x 26 hoosier slicks
150 hp Nitrous
Turbosmart 1200 fuel reg
Bosch 044 fuel pump
Stainless Surge tank ( AJAI )
Carter Lift pump

E.T - T.B.A


AND A NEW PAINT JOB

Pics Coming Soon !

Edited by Advanced Jap, 28 September 2009 - 12:39 PM.

[tharaka]

sounds good!
would love to see pics of all the custom bits

[SIVART]

sounds good!
would love to see pics of all the custom bits

same here

I would go a bit bigger injectors though maybe 650cc

I always wanted tuff Sigma

[Advanced Jap]

the old set up has has been sold

new engine being built

just gota find time to put it all together

Edited by Advanced Jap, 22 June 2009 - 02:34 PM.

[CLuTZ]

Is this the custard coloured one?

I think I saw you pull off a low 12 at calder!


Nice car!!

[matress]

Sounds pretty awesome!

Will it be ready for Heathcote?

[GSRPSI]

the motor your building sounds like the motor im biulding but not with the 3540

hope to see you at calder same day

[doommachine]

Picsorban!!

[Advanced Jap]

the motor your building sounds like the motor im biulding but not with the 3540

hope to see you at calder same day

what rod ratio are you running ?

stock rod ratio is 1.704
2.3 stroker rod ratio is 1.50 with 100mm crank 150mm rod combo
the F20C in the S2000 is above 1.8
F1 engines are somewhere above 2.0

you tell me yours and i will tell you mine

[Advanced Jap]

Sounds pretty awesome!

Will it be ready for Heathcote?

not even close the way im going

[Advanced Jap]

Is this the custard coloured one?

I think I saw you pull off a low 12 at calder!


Nice car!!

yep thats the one ran 12.13 best of 114mhp

with stock internals , bolt on mods

[Advanced Jap]

Is this the custard coloured one?

I think I saw you pull off a low 12 at calder!


Nice car!!

i like to call it dog shit diarrhea 'beige'

but i think its called navada gold, terrible colour !!!

[OFFON-4]

What a tough car, me and the boyz saw it and were like......The F3@$!!!!

Love it, as said previously.. Pics or ban 8)

[p3akin]

these things black over silver with simmon fr18's i think.. look the goods..

[Advanced Jap]

these things black over silver with simmon fr18's i think.. look the goods..

its all stripped down but im in the process of making the exhaust manifold and intake with a dummy engine, will have some progress pics up soon

atm theres ntohing to take pics of except an empty engine bay

[Advanced Jap]

these things black over silver with simmon fr18's i think.. look the goods..

i d love to paint it black, but the guy that has offered to do the body work and paint said no black..... he cbf... to much work

[trevmcrev]

i d love to paint it black, but the guy that has offered to do the body work and paint said no black..... he cbf... to much work

Ha, all panel beaters say that, unless you pay em enuff $$$

[trist]

what the hell i work at a panel shop and black isnt that hard :?
white is the hardest

[Nick_CD9A]

im with him on that aswell. i hate colour matching white's

[doommachine]

It's hard to make old bodies smooth enough to look sweet and black, when I got my torana done, to get it re-done in factory red was about 3k (it was rusty) and to get it done in (near) black was around 2k more because they had to fill every pin dent and make sure all the panels lined up.. plus they put a layer of body filler (or something similar) over the whole thing to smoth it out...

Admittedly it was *beautiful* though, straighter than any new car, or any other car I've seen outside of a show...