Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Photo

FS: 1994 4G93 Lancer GSR

- - - - -

  • This topic is locked This topic is locked
4 replies to this topic

#1
mimmo_gsr

mimmo_gsr

    Member

  • Active Members
  • PipPipPip
  • 175 posts
  • LocationPerth, Western Australia
Hi All,

FS: 1994 4G93 Lancer GSR

Rego:1BTX-...

Location:Perth, Western Australia

Price: $11 200

Contact me via PM, so I know that its a Team4G member :)

Details about the car:

Full Service History
Rebuilt Gearbox, which involved 2nd, 3rd and 5th gear Syncros, 3rd-4th selector and all new bearings and seals including front and centre diff. 6000km old, and running Castrol Syntrans for last 5000km.

Advanti SA11 17x7 wheels with 95%+ Toyo Proxes 4

2.5" Cat Back, front portion is standard

K&N Air Filter

Whiteline 18mm Rear Sway Bar

Whiteline Anti Lift/Max Castor Bushes and Camber Bolts

Uprated Front Sway Bar Bushes

20 000km KYB Shocks all round sitting in standard springs

Front RDA slotted rotors running Bendix Advance pads, rear have about 2 machinings left in them and are running Bendix Advance pads also. All above 70% meat in them.

Engine has done around 220 000, and has run BP Corse Plus mineral oil in it since I have had it. Seems to keep the lifters quiet as they only rattle first thing on a cold morning. New Rocker cover gasket, cam seals, front main seal (rear main is still good). Water Pump at 187 000 along with cam belt. Next service will see the Alt, Power Str & A/C belts replaced. It has Mitsu service before me. It is running the stock 9-10psi and always has as the lines are all still intact.

Bits I have not on the car but could be sold seperate:

VR4 RS intercooler, EVO 1 RS I/C piping, EVO 2 Fiberglass front bar (w'out support bracket or bottom lip), mesh for bar, lots of mandrel bends for an intercooler install.

Here are some Pics

Posted Image

Posted Image
Sorry about the dirtyness, it was Rally Australia weekend!
Posted Image
Boots Open :wink:
Posted Image

Thanks

Mimmo

#2
mimmo_gsr

mimmo_gsr

    Member

  • Active Members
  • PipPipPip
  • 175 posts
  • LocationPerth, Western Australia
bump

:D

#3
mimmo_gsr

mimmo_gsr

    Member

  • Active Members
  • PipPipPip
  • 175 posts
  • LocationPerth, Western Australia
Price dropped to $11 900

#4
mimmo_gsr

mimmo_gsr

    Member

  • Active Members
  • PipPipPip
  • 175 posts
  • LocationPerth, Western Australia
Price Dropped to $11 200

#5
mimmo_gsr

mimmo_gsr

    Member

  • Active Members
  • PipPipPip
  • 175 posts
  • LocationPerth, Western Australia
Sold,

Mods you can lock this thread if you wish :)

Mimmo


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users