15 replies to this topic

[ZedEx]

I have the following for sale:

2 x Full set of CC Lancer Doors - 1 set has ALL electrics and tinted windows - $200 (with out electrics) $400 with electrics and tinted windows
1 x CC Lancer roof, free of roof rust - $150
2 x CC Lancer GSR rear floor pan (for AWD conversion to fwd CC lancer coupe/sedan) - $350 each
1 x Full CC lancer GSR interior (All good condition) - $250
1 x Evo III spoiler - $150
2 x Tail light sets - $85 each
2 x Side mirror sets - $65 each
1 x Socketed GSR ECU - Chipped to run my EVO motor, can supply standard 1.8lt chip if need be. - $250 or swap for single board VR4 ECU


If there is anything else CC GSR related that you want other than Motor or Gearbox just ask as i probably have it.

Please SMS me on (04 05 289 1 79)

Cheers,
Ant

[Dean]

is that a genuine evo 3 spoiler?
if so i might grab it

also have u got a front drivers side power window complete switch?

cheers

[imcrzy]

Ill take a set of tail lights can you PM me some bank detail ect

[chris123]

Im after passenger side rear door trim, and the door handle backing bit?

[p3akin]

how much would it cost to send that roof down to vic.

[Lister]

How about front brake calipers?

[ZedEx]

'93 GSR (Front Damage: Rad support bent, creasing in RH strut tower, front bar f***ed, no bonnet)
EVO III rear spoiler
Coilover front struts
2.0LT 4G63 EVO III Motor
Venollia 20thou over bore forged pistons
Eagle H-Beam rods
ARP Head Studs
ARP Main Studs
ARP Rod Bolts
GT30R Turbo
Action Dan Exhaust manifold
GENUINE Tial 38mm External gate with screamer
Custom TRIKFAB 3" Dump/Front pipe
3" S/S Exhaust
GSS432 Walbro Pump
Sard Fuel Pressure Reg
Custom 4" Intake Pipe
K&N Pod
Sard 800cc Injectors
Move Battery to boot
Greddy profec E01 boost controller
EVO II Box
EVO II Rear Mec LSD
Chipped ECU (With Ostrich)

Made 240kw atw on run in tune.
Unregistered
Take away as is 7k

1989
E39A J-Spec VR4
Body straight, needs paint (mostly in primer)
Broken clutch fork (can change if you like)
Selectable box&transfer
T04E turbo, 48mm external gate, stainless mani
3" Exhaust
2 stage MBC
FPR & GSS432 Walbro Pump
New 17" rims and tyres
Unregistered Unfinished Project
Take away as is $3.5k

[FRANK-E]

wouldnt u make close to 7g if u parted it out?

[ZedEx]

Yeah I would, thats why I'm asking 7k take away... I see a leggy i like

[ZedEx]

Ok going to part out the VR4... should note that it has a Viscous Rear LSD...

SMS me any offers for parts

[ZedEx]

Viscous Rear LSD and Drive Shafts - $600
2.0LT 4G63 (6 Bolt) (ECU, AFM, Intake Pipe, etc) + T04E + Stainless Exhaust Mani + 48mm Gate - $1750
JSpec I/C & Piping - $100
Front Strut Brace - $70
Selectable Box and Transfer - $800
3" Exhaust - $300

Edited by ZedEx, 15 September 2008 - 01:24 AM.

[aussievr4]

After the exhaust PM sent

[Dean]

pic of front strut brace? brand? condition?

[KNGGSR]

how much for the motor, gearbox and diff.

[KNGGSR]

im after a heater core assembly aswell. if you hav one let me no

[baza]

any 3" exh's laying around for a gsr