Fellas,
Just out of curiosity, what would be needed to fit bride brix seats in a gsr .. what rails etc..
Thanks Peter
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
#1
Posted 18 August 2008 - 02:30 AM
p3akin
-
- Active Members
-
- 2,906 posts
Advanced Member
- LocationMelbourne
Current: 04 E46 M3 S/C
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
Back to top
#2
Posted 18 August 2008 - 02:39 AM
OFFON-4
-
- Active Members
-
- 3,284 posts
Nothing Under 35psi!
- LocationMelbourne
My one are customer rails..i ripped my old ones out! wouldnt have a clue as with the standard one as the ones supplied with the seats didnt fit
#4
Posted 18 August 2008 - 02:51 AM
OFFON-4
-
- Active Members
-
- 3,284 posts
Nothing Under 35psi!
- LocationMelbourne
Dont think they do bud, the kit i got was supposed to be a universal one but that is never the case
#5
Posted 18 August 2008 - 02:53 AM
p3akin
-
- Active Members
-
- 2,906 posts
Advanced Member
- LocationMelbourne
ah fuck..
and do u not work? LOL
and do u not work? LOL
Current: 04 E46 M3 S/C
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
#6
Posted 18 August 2008 - 03:01 AM
OFFON-4
-
- Active Members
-
- 3,284 posts
Nothing Under 35psi!
- LocationMelbourne
#7
Posted 18 August 2008 - 04:10 AM
Evo-00x
-
- Donating Members
-
- 8,151 posts
4G63T AWD CC COUPE
- LocationNewcastle
my brother fitted Bride seats into a Proton (same as Lancer). He used the Recaro seat rails from the EVO 1-6.5 and a custom made mounting plate on top of it. i.e. fitted an entire plate to the bottom of the Brides, then made holes in the plate to bolt onto the EVO rails.
AWD. 2 Litre. GTX3076R 0.82.
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
330kw atw @ 28psi 98 pump fuel.
372kw atw @ 28psi E85 Flexfuel.
EVOLVED AWD COUPE
WWW.EVOCOUPE.NET
#8
Posted 18 August 2008 - 04:16 AM
DOUGMO
-
- Active Members
-
- 8,885 posts
yoni lover
- LocationMelbourne
See if there is bride rails to suit a 6
GENUINE CE9A evo2 gsr track car
all fabrication BJP AUTOMOTIVE
winton 1:27.4 /// sandown 1:21.5 /// phillip island 1:49.2 /// haunted hills 59.1 /// eastern creek 1:35.4 /// winton short 1:01.4
#9
Posted 18 August 2008 - 03:43 PM
LAN-EVO3
-
- Active Members
-
- 230 posts
Member
- LocationSydney
depends what bride seats you wannt to use... a set of buddy club rails can take bride side mounted seats. thats what im using now. except im using buddy club seats with the rails. lol..not bride, too $$$.
and it sits you really low too
and it sits you really low too
....::::BUILT FOR TOUGE::::....
#10
Posted 19 August 2008 - 08:34 AM
p3akin
-
- Active Members
-
- 2,906 posts
Advanced Member
- LocationMelbourne
any pics of your seats LAN-EVO3?
i like the bride brix 1.5
i like the bride brix 1.5
Current: 04 E46 M3 S/C
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
89 E30 325is
RIP: 94 J-Spec Lancer GSR - 149.1 kw
Winton Raceway: 1:41.8900
#11
Posted 19 August 2008 - 09:23 AM
LAN-EVO3
-
- Active Members
-
- 230 posts
Member
- LocationSydney
ill take one asap...on morning shift 3am to 3pm.
i have a mate thats around 185cm height and with the buddy club set on the second lowest front and third lowest rear...he heas plenty of room.
i know a mate of mine is running a buddy club rail with bride zeta seats on a 180 and it sits him pretty much on the floor pan.
i have a mate thats around 185cm height and with the buddy club set on the second lowest front and third lowest rear...he heas plenty of room.
i know a mate of mine is running a buddy club rail with bride zeta seats on a 180 and it sits him pretty much on the floor pan.
....::::BUILT FOR TOUGE::::....
#12
Posted 08 April 2018 - 05:03 AM
Golfer2000
-
- Members
-
- 39 posts
Advanced Member
- LocationUSA
I just finished mounting my bride seats to my oem sliders and the seats are crazy high. What's the easiest way to fix this?
my brother fitted Bride seats into a Proton (same as Lancer). He used the Recaro seat rails from the EVO 1-6.5 and a custom made mounting plate on top of it. i.e. fitted an entire plate to the bottom of the Brides, then made holes in the plate to bolt onto the EVO rails.
#13
Posted 08 April 2018 - 10:22 AM
romeo
-
- Active Members
-
- 619 posts
Advanced Member
- LocationLiverpool NSW
ive got bride digo r seats in my gsr. evo 4-6 rails sits nice and low no issues what so ever.
https://www.nengun.c...e/rails-ro-type these fit brix II seats not sure if any difference between brix and brix II
- Golfer2000 likes this
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
