SIKWPN

Yer i should have it, just gotta dig in where i put it, if i cant find it ill take it of my other car...

take em! their all yours LOL

It's an imported gsr black with evo2 motor and evo1 drive line, has evo bonnet guards etc never been boosted

1x 4G64 7 bolt narrow engine block with crank and sump, can use vr4/evo1-3 head on for 2.4lt stroker $300

1 x 4G63 7 BOLT BLOCK WITH CRANK ( HAS SURFACE RUST SUIT REBUILD ) $90

1 X GEN EVO1 REAR WING (NEEDS RESPRAY/REPAIR AND HAS A CHUCK MISSING ABOUT 10CENT PIECE ) $100

1 X SET FRONT JAP SPEC GSR RECARO WITH RAILS (HAS BACK SEAT ASWELL BUT NOT IN GOOD NICK WILL THROW IN WITH THE SALE) $300

1 x 4G63 STOCK FUEL RAIL WITH REG $20

1 X STOCK EVO 3 FUEL PUMP (USE) $30

1 X VR4 STOCK COIL PACK (MISSING 1 COIL PACK) $20

1 X GSR STOCK COIL PACK $50

1 X EVO1-3 STOCK COIL PACK $50

1 X EVO 1-3 CRANK ANGLE SENSOR $60

1 X EVO 1-3 4G63 ENGINE LOOM $150

1 X EVO 3 INLET MANIFOLD WITH EGR $150

1 X COMPLETE EVO 2 MOTOR MINUS TURBO+CLUTCH CAN SEE/HEAR RUNNING ON CAR 1.5Kono CAN SELL IT CHEAPER WITHOUT HEAD

1 X TOP SECRET STEERING WHEEL WITH QUICK RELEASE HUB $300

1 x APEX'i BOV $40

4 x RC 1000cc INJECTORS ( NEW ) direct fit to stock rails and plugs $280

1 X BOSCH 044 EXTERNAL FUEL PUMP (NEW) $200

1 X EVO 1-3 STD OVAL INTAKE PIPE FROM AFM TO TURBO $50

1 X PEDDERS FRONT SWAY BAR TO SUIT GSR/EVO1 (I THINK ITS 24MM THICK)(never use) $50

1 X VR4 CRANK ANGLE SENSOR $60

1 X EVO 1-3 BRAKE MASTER 13/16 $40

1 X EVO 1-3 BRAKE BOOSTER $40

1 X 4G63 7 BOLT OIL FILTER HOUSING $30

1 X POWER STEERING PUMP( CAME OF AN EVO 3 MOTOR ) $30

1 X STEERING RACK ( CANT REMEMBER IF ITS OFF AN GSR OR AN EVO 1-3) $30

3 X ARIAS FORGED PISTON 20tho OVERSIZE SUIT 4G63 7 BOLT ( PART NUMBER 352102) (USE) $100

4 X AUTO METER GAUGES ( BOOST, OIL PRESSURE, WATER TEMP AND 5" MONSTER TECHO WITH SHIFT LIGHTS ) USE $450

2 X NOS 10lb BOTTLE WITH BRACKETS + 1 NEW POWER KIT WITH JETS ( HAVE TRY FITTED THE BOTTLE TO CAR BUT NEVER USED SO STILL NEW ) $700

1 x CUSCO 6 POINT BOLT IN ROLL CAGE TO SUIT CC/GSR/EVO1-3 COME WITH NUTS / BOLTS AND PLATES $650

1 X EVO 3 ALLOY UNDER TRAY $150

1 X EVO9 FRONT RIGHT LOWER CONTROL ARM AND HUB

1 X SET REAR F/GLASS POD $30

1 X VR4 FRONT HALF INNNER DRIVE SHAFT $100

1 X EVO 1-3 FRONT HALF INNER DRIVE SHAFT $100

1 x SET TIEN COIL OVERS TO SUIT GSR/EVO1-3, NEARLY NEW 1.5K

4 X 15" Evo 3 Oz RACING WHEELS ( GOOOD NICK RESPRAYED/POWEDER COATED WHITE WITH 2 GOOD 80% TYRES ) $400

4 x 17x7 8 SPOKES UNI 4 STUD ALLOY IN BLACK WITH 205/40/17 80% TYRES, 2 HAS GUTTER RUSH $550

4 X 17X7 AVS 6 GOLD 4X114.3 STUD $600

4 X 17X8 +38 5X114.3 EVO 8 ENKEI IN BLACK $500

1 x SET REAR RACE FAB BREMBO BRACKET TO SUIT GSR/EVO1-3 ( NEW ) $350

1 x STOCK EVO 1-3 FRONT MOUNT INTERCOOLER WITH PIPING

1 x complete import gsr in black with evo2 motor and evo1 drive line, evo bonnet guards, climate control, rear wiper, rear antenna etc as in pic, never been boosted, was use as an daily,no longer needed, no rego 4.9k ono (front bar sold) can supply with RWC at an extra cost...

Location: Melboune, Bayswater

Contact: Pm

dirty bastard, didnt think about me.. nigger needs wideband! >.<

If you guys want custom upper and lower silicone hoses, I can organise a group buy. I just need samples....

is that mean u can get the all the radiator hoses done baz? like heater hoses etc?

ok im gonna post it up cos barry ask me to otherwise i CBF!!!!!!!!

this is an OS GIKEN TWIN PLATE CLUTCH R2CD rated at 600hp to fit EVO 1-3

Pressure cover plate clamp load 10,700Nm

to fit this you WILL need an OS GIKEN sleeve bearing kit as the standard one wont fit.. dont bother trying the std one cos i have already.. and an extra rear backing plate..

everything eles just bolt on like any other clutch..

part number for just the replacement bearing for OS.G. is NSK TK40-1B2

and just incase you guys want the standard bearings too.. its NGK 48TKB3202


enjoy

Very interested in the Evo 3 guards if they are the genuine metal ones.

Would you be willing to ship to Adelaide at my expense?

i can but i dont know who to go thro.. as im worry they might damage.. unless u can organise it for me and i can drop it off at an depot for u..

Do you have the right rear door power window regulator?

nope.. sorry mate..

pics of genuine rear pods ad speedo cluster. thanks

done

Pic of the EVO vents please, either ones will do

done

Is there any play in the gear leaver and shifter cables? If not I'll take them.

i just had a look n they seem to be ok.. but has surface rust..