Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

pad4g63

pad4g63

Member Since 07 Feb 2006
Offline Last Active Apr 28 2020 10:25 AM
-----

FS: (SYD) 360kw 2.3 stroker setup

29 May 2014 - 11:40 AM


Hey guys

I'm going to try something different with the car and setup, so I'm selling the entire engine/turbo setup and some other pieces. At this stage I would like to sell it all as one but if I get enough interest for a part out I will go down that path.


So here it goes.

The engine is a 6 bolt bottom end with the following parts.

Jackson Auto Machine 2.3 stroker kit
Forged steel 100mm crankshaft
JE pistons
Oliver rods
All new bearing and seals
New oil pump housing evo style bracket with external oil cooler
Modified oil pan. Now holds 7L
Evo 9 balance shaft

The Head is a big port vr4 that was send to Jackson auto machine in Hanover, MD for
CNC with following parts installed,
1mm O/S nitride coated valves
Multi angle valve cut
Titanium bee hive springs & retainers
Bronze guide
HKS 272 cams and cam gears,
Have flow chart.
Turbosmart fuel reg
Hypertune fuel rail with id2000's

All this is controlled by a vipec v44 and Cdi unit with custom loom for the engine and fuel pumps. Car made 365kw @ all 4s on just 23psi

Intake & exhaust manifolds, turbo and wastegate
Hypertune inlet manifold with Plazmaman 76mm TB
6 boost exhaust manifold
Borg Warner/bullseye S259
Tial 44mm external gate plumbed back
3in stainless exhaust from turbo back, 3.5 metal cat, sport muffler.

Fuel system.
Twin walbro pumps mounted in the standard tank with a swirl pot
1/2in feed and return lines

Intercooler and piping.
Hypertune custom radiator with header tank
Hypertune intercooler with piping all in 2.5" dia and 4" intake with custom air box.


There's probably a few things I missed but pm me for more details.
I'm going to set the price at 12k for everything if u think that's 2 much make me an offer. I'll be happy to talk.

Ps everything was in perfect running order when I pulled this from the car.

More photos available on request.
Attached File  ImageUploadedByTapatalk1401363570.167656.jpg   89.22KB   102 downloadsAttached File  ImageUploadedByTapatalk1401363589.277641.jpg   95.6KB   111 downloadsAttached File  ImageUploadedByTapatalk1401363596.477733.jpg   90.84KB   101 downloads

Gsr door cars

17 February 2014 - 06:47 AM

Item: Gsr & evo 1(I think) factory door trim
Item Condition: good, need a clean been sitting in shed.
Price: Free
Extra Info: till this weekend then going in the bin
Location: Western Sydney
Preferred Contact Method: pm
Pictures: Attached File  ImageUploadedByTapatalk1392619596.681590.jpg   265.92KB   92 downloads

Evo 1-3 RS brake master and prop valve

09 February 2014 - 10:42 AM

Hey guys.

I've started rebuilding my car and I need a bit of help with the how the brake lines run from the master to the RS proportioning valve and on to the brakes. I've tried looking online for photos but no luck. Can anyone help?

Evo 1-3 brake master cylinder

30 December 2013 - 11:41 PM


Item: evo 1-3, 1 inch brake master cylinder
Item Condition: very good
Price: $100
Location: Western Sydney
Preferred Contact Method: pm
Pictures:Attached File  ImageUploadedByTapatalk1388446853.565142.jpg   287.09KB   95 downloadsAttached File  ImageUploadedByTapatalk1388446861.913837.jpg   291.63KB   92 downloads