ib6ub9

All parts are located in Brisbane. Pickup is available.

Aftermarket/Modified Parts:

-Plasmaman black silicone intake pipe $100

-AMS Cam gear tool - $50

-GFP Atomic Boost controller (black) - $50
-Vibrant 3.5in stainless v-band flang/clamp kit - $80

-Billet -10an turbo drain - $50

-Prosport Oil Temp Gauge - $50
-Force Performance numberplate surrounds - $30

-DSS billet drive shaft spacers - $25

-Garrett GT30/35 manifold/dump/turbo draink gasket kit - $30

-Built GTA transmission (15klms old) $2500

OEM:

-Stock from strut brace - $50

-Evo 7 GTA wheels with useable tyres $400

-CT9A Dash - $200

-ACD computer - $100

-Evo 8 Head Gaskets (x3) - $50 each

-Evo 9 Mivec cams (stock) - $50
-Evo 8 stock turbo drain - $15
-CT9A Rear ayc axles - $250
-CT9A rear lower control arms - $100 each
-CT9A Turbo drain gaskets (3) - $5 each

-CT9A aircon compressor - $100

-CT9A ballast resistor - $25

-CT9A fuel pump resistor - $25

-CT9A AC/Heater box - $50

-CT9A drivers side front lower control arm - $150

-CT9A front subframe - $150

-CT9A power steering rack - $150

-CT9A steering column clock spring - $50

Payment Pending:

-Evo 9 Exhaust cam sensor and housing - $150 – Payment Pending

Item: Crower Adjustable Cam Gears (pair)
Location: Brisbane, freight available at buyers expense.

Price: $200 $175
 

Info: Crower adjustable cam gears to suit Evo 4G63, they have had limited use, fitted with ARP bolts for adjustments.

 cam gears.jpg   27.32KB   99 downloads

Item: CNC Ported Big port Head
Location: Brisbane, freight available at buyers expense.

Price: $4,000.00 ono   $3750
 

Info: The head started as a new core that I purchased in the US for $1600 USD where it was CNC ported. The head has also been modified to allow the use of Evo 9 mivec intake came but can be used with the non mivec evo 1-3 cams also.

- CNC Ported

- Bronze valve guides

- Ferrea beehive valve springs

- Ferrea Ti retainers

- Ferrea locks

- +1mm Supertech inconnel exhaust valves (pocketed 120 thou to allow massive lift and duration cams)

- +1mm Supertech nitride inlet valves (pocketed 120 thou to allow massive lift and duration cams)

- Evo 9 lifters

- Evo 9 Rockers

- ARP Stainless exhaust studs

- Rocker cover is included

- no cams

##NOTE - If the new owner is interested in running mivec I can include the mivec valvebody, solenoid, cam sensors, adaptors and lines at a cost.

 CNC DSM Flowchart.PNG   38.15KB   102 downloads    IMG_5049.JPG   118.35KB   97 downloads   IMG_5052.JPG   122.52KB   94 downloads

 IMG_5059.JPG   199.66KB   100 downloads   IMG_5060.JPG   172.47KB   98 downloads   IMG_5046.JPG   164.32KB   94 downloads

Please close