Jump to content

Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Mcfly

Mcfly

Member Since 24 Mar 2006
Offline Last Active Nov 08 2007 11:59 AM
-----

In Topic: cam cover hittin

04 November 2007 - 10:30 PM

i sloted the holes on bonet catch to raise it up to meet the new bonet position. when you raise the bonet and guards they keep the std look and bonet doesnt look raised. and with the engine mount i used the stock proton one unside down to get the engine to sit in the right position in car(driveshafts have been fine for the last 4 years while engine has been in there). :)

In Topic: cam cover hittin

04 November 2007 - 01:00 PM

i fitted the original proton mount inplace upside down to get the engine to sit in the engine bay nice and level but couldnt go any lower due to driveshaft getting close to lower suspention, i raised guards/bonet to give timing cover room.

In Topic: cam cover hittin

04 November 2007 - 12:07 PM

i put the evo 3 motor in my gti but the cam cover is hittin my bonnet wat can i do ???


you can raise the guards and bonnet up, washers under top screws on guards and under hinge on bonet(you can get about 15mm) also you can cut the brace off where it hits the cover or take cover off.

  1. 4GTuner
  2. → Viewing Profile: Posts: Mcfly