Extremer!

Here is our DSM Forward Facing Manifold. It allows guys to have more of a custom style manifold setup and run a turbo in the front fascia area. It fits the first and second gen DSM’s (Talons, Eclipses, Galants, Evo 1-3), and is meant for the guys that want to make big boy power. You can get it in T4 open housing, or T4 divided – if you need something else just contact us and we’ll try to work it out.
For any info or inquiries please send us a pm or emial at [email protected]

PRECISION TURBO

Turbos (CEA = billet wheel):

Price from 990$ including GST
Group B housings:
PTE5557 CEA Compressor - 570 hp
PTE5857 CEA Compressor - 605 hp
Group C housings:
PTE6262 CEA Compressor - 680 hp

Price from 1150$ including GST
Group D housings:
PTE6266 CEA Compressor - 745 hp
https://encrypted-tb...ehcq6axxkwbjldX



Group D housings:
PTE6766 CEA Compressor - 945 hp
https://encrypted-tb...rKIm_lvv2AOviaQ


Price from 1570$ including GST
Group E housings:
PTE6768 CEA Compressor - 935 hp
PTE7168 CEA Compressor - 945 hp
Group F housings:
PTE7175 CEA Compressor - 985 hp
PTE7675 CEA Compressor - 1200 hp
https://encrypted-tb...pEBSvfg4YAoeaV_



Group B Housing Options (with a/r ratios):
T3 4 bolt: .48, .63, .82
T3 vband (2.5" outlet): .48, .63
T4 vband (3" outlet): .58, .68
Vband inlet/outlet (2" inlet, 3" outlet): .64, .82

Group C Housing Options (with a/r ratios):
T3 4 bolt: .63, .82
T3 vband (2.5" outlet): .63, .82
T4 vband (3" outlet): .58, .68
Vband inlet/outlet (2" inlet, 3" outlet): .82

Group D Housing Options (with a/r ratios):
T3 4 bolt: .63, .82
T3 vband (2.5" outlet): .63, .82
T4 vband (3" outlet): .58, .68, .81, .96
Vband inlet/outlet (2" inlet, 3" outlet): .82

Group E Housing Options (with a/r ratios):
T4 vband (3" outlet): .58, .68, .81, .96

Group E Housing Options (with a/r ratios):
T4 vband (3" outlet): .81, .96

There are also T4 divided housing available as well .
A/r's available: .84, 1.0, 1.15, or 1.32



Waste gates:

39mm 235$ including GST


46mm 350$ including GST


66mm 500$ including GST



There are many more options .


I will update during the day with TurboSmart , Garret , Tial products .


For more info or inquiries please see www.extreme-projectworld.com or send us a pm or email at [email=""][email protected][/email]

We are the authorised dealer of Clutch Masters for Australia . Clutch Masters offers clutches for any car and any spec. . Clutch Masters has a big variety of clutches from Organic up to Twin disk and can suit any power and application , even if you want high revs . Also Clutch Masters overs a variety in materials . Clutch Masters also offers it's own flywheels .


Furthermore Clutch Masters provides kits also for Hseries engines with Bseries gearbox and Kseries engines with Fseries gearbox .

All Clutch Masters clutch kits come complete with:

Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)
Alignment Tool

Typical benefits of a lightweight flywheel
Reduced mass equals increased acceleration.
A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag.
Increased supercharger efficiency due to less parasitic drag on the crank.
Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel.
CM uses High Carbon steel for the friction surface. (Replaceable on Aluminum Flywheels)
CM Billet Aluminum and Steel Flywheels meet SFI Spec 1.1 or 1.2

Hello to everyone ,

We are official dealers of AFI Turbo .
AfI turbo offers complete kits like replacement kits , upgrade kits even race kits for the EVO VII-IX and EVO X .
They come complete with charge pipes , dump pipes , downpipes , BOV's , wastegates , intercooler , turbo , oil/water lines etc.
They come also either with Garrettt Turbo or Precision .

AFI Turbo products come with lifetime warranty .

We as Extreme Project World , can offer you also stock frame turbo upgardes as well as turbo impeller upgrades for most turbo's .

Please visit www.extreme-projectworld.com
For any info or inquiries please send us a pm or email at [email protected].


Thank you!

Hello to everyone . We are a new store located in Sydney . Currently we only sell our products , but soon we will have also our own workshop to do also installations .
My name is James and I am the owner of Extreme Project World .
We import the following products as main dealers :
Clutch Masters , Ralco RZ , Nology , Cat Cams , Touge Speed Automotive , AFI Turbo .
We are on discussion with some more companies to become their dealer here in Australia .
We also import the following :
Wiseco , Cp Pistons, Je Pistons, Diamond Racing Pistons, K1 Technologies , Molnar Industries (which is formed by the former CEO of K1 Tech , Tom Molnar)Cometic,ARP,Mishimoto,Cusco,Ferrea,HKS,Deat schWerks,SFS Hoses,Samco,Cosworth,AP Racing , StopTech and many more .

We also do custom parts like : custom rods , pistons , crankshafts , intake plenums , etc.

You can contact us with pm or at the email [email protected] . You can also visit our website www.extreme-projectworld.com .

We place orders almost every week or every 2 weeks depending on the products . IF we DONT have your product that you want in stock ETA is usually 5-7 days if in stock with our partners .

Thank you !