Spaniel

Hey guys I'm sure this topic has been covered before but I can't find any post relating to it, anyway looking a a set of jic coilovers which came of an Evo 5 I was wondering if they are a direct bolt up on the evo4? And if not what changes need to be made for fitment
Thanks dan

Ok guys let me explaine I have noticed with my Evo 4 that cold starts take a while to get it
Going and when warm the idle changes from around 900rpm to 1600rpm and sort
Of chops and changes as I drive,
I'm using a xf throttle body (custom intake man) but havnt got a tps so I'm thinking that could b the problem other thing I'm thinking is that the throttle plate could b loose and become stuck open a fraction hence it idling high. I'm thinking of tracking down a new throttle body to suit with a tps and hope it does the trick, any suggestions you guys have is much appreciated.
Thanks dan

Hey guys really want to get a set of work meisters for my 4 question I have is that could you run an 18" wheel that's 10" wide on the rear and 9.5"
On the front seems abit extreme but sure if they
Would fit it would look jdm as!!
Thoughts?? Dan

Hey guys hears my latest ride and first ever Evo been on the mr2 scene for the last few years owned around 10 different sw20s and aw11s but
very recently picked up this bad boy. It's one crazy car with evey Single thing anyone would want on a shopping list haha

1997 Evo 4
Which you would all know are becoming quiet rare now
It is a yellow plate personal import 88,000km on the odo.

Engine setup was built by v e rigoli dynoed making just over 300awkw 24psi and 98 octane fuel Much more room with more boost and e85 I'm sure I'd crack 400kw no worries

Mods done

Engine mechanical:

-Autronic Plug-In ECU

-PAR Billett Conrods

-Wiseco Forged Pistons

-Ported Head

-HKS Lifters

-HKS Valve Spings & Retainers

-HKS 272 Cams

-HKS Adjustable Cam Gears

-hks Metal Head Gasket

-Tomei Crank Bearing & Cap Studs

-Gates Timing Belt

-GT3076 Garrett turbo .63 A/R AKA GT 3070 with Gready turbo beanie

-3" dump into 3" Fujitsubo Exhaust

-6Boost Exhaust Manifold

-44mm Tial Wastegate

-GFB Atomi boost controller

-Blitz plumb back Bov

-Custom front mount intercooler & piping and water spray jet set up

-Cusco cooling plate

-PWR Radiator, PWR fans

-68mm throttle body

-Custom Sheet metal inlet manifold, oil catch can and cold air box

-Custom made fuel rail

-Walbro fuel pump

-sard fuel pressure regulator

-780cc injectors

-Exedy Twin Plate clutch

-short shifter kit

-braided lines and fittings

-K&n pop filter

-Batterie located to the boot





Suspension and breaks:

-Ohlins Race coilovers in rear struts upfront

-Cusco front and rear strut braces

-Adjustable camber and castor control arms

-Evo 8 brembos resprayed in STI gold

-Elig street pads

-HEL braided brake lines

-DBA 4000 slotted front

-RDA slotted in rear

-Evo 6 brake master cylinder



Wheels and tyres:

-oz racing 17" Raleigh edition wheels
-Kumho ku31 235/45/17
-Rays blue lug Nuts and lock nuts

Body, Lighting and electrics

-Evo 4 RS fog light covers
-Fudao Electoric HID kit
-OEM window visor
-Factory silver
4% window tints
-optional sun roof
-factory Power windows,

Interior:

-recaro bucket seats
-momo steering wheel
-Alarm with three point immobiliser
-Defi boost gauge
-Defi electronic boost controler
-Greddy turbo timer
-Attain gauge holder
-Ralliart gear nob
-Sony head unit
-Sony 6x9 speaker rear

Spaniel[/img]