Find content
Male
- White Knight likes this
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
GSR
#317295 different Turbo on 4g93
Posted by
on 12 May 2015 - 02:00 PM
I created it myself, however data is from garrett website and this forum.
#316024 Four cc gsr lancers drag racing
Posted by
on 12 April 2015 - 01:27 PM
#305769 Bearing behind flywheel
Posted by
on 11 August 2014 - 12:16 PM
#304439 gsr/evo 1-3 ecu pin 24 'rear screen on' what is it???
Posted by
on 17 July 2014 - 09:24 AM
You are probably right! I've started looking into it further today and so far have discovered that ecu pin 24 wire splits in two directions. One end goes to one of the dash loom plugs and the other
into some electronic component (resistor maybe? or whatever else it is).
on the other gsr loom I have, I found similar looking thing but with three wires
From that component(two wires from orange one) it goes to the male plug that connects to the part of the loom that belongs to the fuse box in engine bay.
Tomorrow I'll investigate further where they go from those plugs onwards.
- evopwr likes this
#304101 F.S: 1991 Lancer GSR 4G61T *SOLD*
Posted by
on 12 July 2014 - 06:11 AM
#302304 What in-tank pump for up to 400kw??
Posted by
on 11 June 2014 - 03:26 AM
Thanks for the great info EVO-00X, I've saved all your pics from the pump install 
I guess walbro 460 it is then 
is it safe to get them from ebay? particular seller that can be trusted?
thanks guys
- EV0300 likes this
#229200 20g compressor wheel - different versions???
Posted by
on 14 April 2011 - 02:02 PM
after bit of a research I've found there are two types..
only the center section is diff on this pic, shape of the blades looks the same.
EDIT: center section measures the same on both of my wheels.
only the center section is diff on this pic, shape of the blades looks the same.
EDIT: center section measures the same on both of my wheels.
- Dean likes this
#195151 VR4 piston ring thickness.....
Posted by
on 21 April 2010 - 07:11 AM
1.2 and 1.5mm for standard piston
