Find content
Not Telling
- JayRome likes this
Welcome to 4GTuner
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!
Cranked
#342307 Aftermarket exhaust manifold
Posted by
on 17 December 2018 - 10:18 AM
Yeah I saw that one Jay. My concern is where that WG position is. 6boost does one but I'm not sure in a 38mm WG. Which 38mm has done everything I need and can regulate boost from 12psi to 26psi so far.
#342285 Newbie
Posted by
on 14 December 2018 - 01:09 AM
Welcome Dave. You're hailing from the Emerald isle I see. There is a myriad of knowledge and wisdom here. The search function is your friend. Give us a rundown in your car and throw some pics up. 👍
- dave.hartnett2 likes this
#342138 Electrical issues - E1?
Posted by
on 13 November 2018 - 02:10 AM
If you have a volt meter, do a parasitic draw test.
There are heaps of videos on YouTube on the procedure, but you basically monitor than amperage across the battery and keep pulling fuses until it goes to 0. Then you know which circuit you are looking at.
Good luck.
Current across the battery.... Hmmmm
- Evo-00x likes this
#341846 Forged or cast bottom end?
Posted by
on 29 August 2018 - 07:30 AM
Speak to Andrew at Sideways Motorsports. He is a top guys and knows his stuff.
- CAM280 likes this
#341614 Throttle body connector
Posted by
on 22 July 2018 - 04:23 AM
Pretty sure it's the idle speed controller
- myevo1 likes this
#340375 What's needed to run 30psi?
Posted by
on 10 February 2018 - 11:48 AM
My 6 bolt made 400 atw on pump at 21psi
- White Knight likes this
#338368 Bazeng - GTO 2nd Gen. 6G72 build
Posted by
on 15 August 2017 - 10:27 AM
Exactly 😂
- White Knight likes this
#337969 Bazeng - GTO 2nd Gen. 6G72 build
Posted by
on 17 July 2017 - 03:09 AM
Oh those turbos are so cute
- ted likes this
#337561 Forged steel
Posted by
on 18 June 2017 - 10:18 AM
Yeah Mitsubishi turbo diesel come forged.
- Taz likes this
#336478 Haltech E8 Base Map
Posted by
on 28 March 2017 - 03:44 AM
There will be a base map for a 63 on the Halwin Software. Then you will have to adjust your fuel trim/scaling for the bigger injectors, you can do it as a percentage value, which will be the quickest way.
- ted likes this
#336364 evo 1 attempted theft (joyride)
Posted by
on 20 March 2017 - 09:47 PM
Unfortunately they are very easy to get into, A simple cable tie and your in, in less than 10 seconds. I'd go a hidden kill switch, a fuel, ignition cut or both, a momentary switch and a relay setup with retaining contacts, that way the car would start unless that button is pushed every time.
- abyz likes this
#336178 How to change gear ratios to 3.545
Posted by
on 15 March 2017 - 09:45 AM
Well no offence, but why would people want to regurgitate what has already been covered several times.
- evo-gsr likes this
#336164 How to change gear ratios to 3.545
Posted by
on 15 March 2017 - 04:48 AM
