HSG that was meant to be, but hasn't yet

4GTuner

Help Support 4GTuner:

My 5th gear is not "hard" to get in, but to stop it from crunching you need to take your time while shifting. I had my gearbox repaired a few years ago as 2nd was completly stuffed.
 
It's either 8 or 10psi.

They will handle 14PSI without any upgrade but a tune is suggested.
If you want to hit 18 you should invest in a fuel pump, tune and a decent intake and exhaust.
 
20psi is stock for around here :lol:

+1

I spiked to 24 PSI accidentally on the old Hyper Auto. It ran 20 without any hickups.
the new RVR will be running 22 - 24 PSI though I've got all the addons required to support the additional boost. :)

CLuTZ and many people here know this but just saying it again, stock 4G63 shouldn't go over around 18-20. You can do it, but I wouldn't suggest it
 
+1

I spiked to 24 PSI accidentally on the old Hyper Auto. It ran 20 without any hickups.
the new RVR will be running 22 - 24 PSI though I've got all the addons required to support the additional boost. :)

CLuTZ and many people here know this but just saying it again, stock 4G63 shouldn't go over around 18-20. You can do it, but I wouldn't suggest it

Ask brisvr4 about it :)
 
You can run 30psi, if you have the setup and tune for it.

I ran 25psi through my old VR4's stock motor besides cams....
 
the dealer gave no response to my concerns

want a HSG trim, but that SSG is nice

the nice HSG i tracked down isn't listed for sale but ive been may be tempted the guy seems reluctant to sell, he had 12,14,16 boost
 
Back
Top