Search results

As far as I know the magna tr knuckle has the same calliper mounting as the RVR. The front evo brembo callipers from 5 - 9 don't bolt up "I learnt from the hard way lol" so you either need to source an adapter to be made up or a another knuckles that would suit...

damn those recaro seats arent cheap1

i though the 2g evo can not work with the ecmlink v3 but v3 lite is ok.... or did I get it mixed up? :lol: I think ill go with the SD bundle and Direct connect sd cable for the ease of installation. http://www.ecmtuning.com/product_info.php?cPath=28&products_id=50...

Leon are you running the ecm link v3 or the lite version? and did you buy the SD bundle from ecm tuning site or you source the sensor from somewhere? http://www.ecmtuning.com/product_info.php?cPath=28&products_id=50&osCsid=hlnqmqrojs61qimilcvm8r33n3 Can you post some pics where you attached...

Hi Leon, Can you please send me the link... I'm using a custom made manifold, thats explain why :lol:

Grinded off the square block yesterday, I still do need about 5 to 10mm to seat the exhaust manifold in... I may need the flange, any idea where can I get one of these http://www.aptuned.com/VIB-1460M ?

I did attempt to clock the compressor, very limited space. I need about 1cm of space so my exh manifold can sit in the head properly. Cross finger as Im gonna cut the square bit off on the weekend :lol:

Hi guys, I was wondering is it safe to grind/shave off the square bit on the engine block (the square bit is beside of the rear balancer shaft), my a/r 7.0 compressor is hitting the engine block... let me know before I put a hole there :lol: Circled in red... Wae

There are plenty of things still holding me back lol...I need to get speed density for my ecmlink gonna run map sensor :D

Got it loosen with a rattle gun! Thanks Brian!

Hi Brian, I do have a compressor Ingersoll Rand TM 300 and it has an air regulator on it, regulator leaks abit... I can't find any spec on the compressor on the net, will probably see better tomorrow morning. The car is located in Riverton, about 10 - 15mins reach to my house if u take the roe...

:lol: thanks Jack! I hope it will get the bolt loosen! Is there any in Perth, I ain't going to Bunbury that far hahhaa....ohhh hey are those powerbar guaranteed not to bend, has any one use them before? If I do end up buying one of those bar, then i'll need to get something to hold on the...

Brian I've allow some space between the bar and the floor, it still won't open. I have look at so many vids on youtube, those bolt come loose after turning the key..... could it be my battery? ive charged up my car batt, and have another car doing jump start the same time. Or could loctite be...

For now I'll be using the stock evo 3 tb with the ku intake manifold. I will need to put the KU tb to aside until I can find a suitable IAC for it, does any one has these KU tb, KU website seem no longer available. http://www.compct.com.au/car/tbnintake.JPG

Heres my bended md tool while attempting to undo the crank bolt :lol: http://www.compct.com.au/car/md.JPG Can't open the crank bolt with the starter... http://www.compct.com.au/car/starter.MOV

Bahhaha I only can mig weld! :angry: Are you using the stock evo IAC on the s90? I found out I need to use the IAC from KU Enginering on ku tb, the ku IAC adapter is not matching to my evo IAC....... so sad ><

I charged up my rvr batt and had a car doing the jump start, still can't undo. Can anyone else confirm to undo the nut it goes anti clockwise? I don't want to go buy a rattle gun than find out it won't open the nut ><

Are you using the stock inlet manifold or aftermarket? What mods did u do to the manifold? I'm using the aftermarket ku inlet manifold and ku tb >< there's no space for the iac...

I was away on holidays for a month, and was researching on parts and info what I needed. It's time consuming and I'm a first time mechanic that's an exceptional :lol:.... now the car under body is full of redbacks :lol: Once the seals are replace, I hope I'll get the torque settings on the...

Can anyone tell me what's that thing circle in red; i think it has something to do with the brake fluid? and can it be relocate it to some where else in the engine bay? I bought a 70mm throttle body, unfortunately there isn't enough space for the IAC valve. I tried rotate the the tb, no space...