272 Camshafts?

[Hyper_Mike]

Hey guys,

I have been looking at different mild upgrades to my 4g63. I was wondering what people are running for aftermarket cams using stock springs?

Cheers, Mike

 

[EVOCPE]

If you wanna run 272 cams, the smartest thing to do is throw suitable valve springs/retainers in to suit, only 272 cams I know of that u can run with the stock springs are the BCs

 

[BMGTZ]

I think some of the early low lift HKS will go in over a stock spring.

 

[mistamidget]

I've got BC 272's with stock springs and they seem to be all right in my 6.
I recall getting maybe 10kw more with them and they don't seem to make the engine fell much different.

 

[Hyper_Mike]

I wonder what these are like?

http://www.ebay.com.au/itm/370626661988?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Jasma Cams, i have seen there have been some threads started about these but no conclusive info.

 

[deepsouth]

http://www.dsmtuners.com/forums/cylinder-head-short-block/361516-cam-test-i-will-dyno-test-delta-hks-272-delta-k272-bc-272-cams.html

It is an awesome read and essentially explains each motor likes particular cams depending on setup.
I would have a read and then make your choice based on what you want to do.

 

[4piknup]

Evo 7-9 come oe with beehives and there is a set on ebay. Was like $100 or something

 

[Hyper_Mike]

Evo 7-9 come oe with beehives and there is a set on ebay. Was like $100 or something

Will they swap straight into the HSG 4g63? Also im having trouble finding them on ebay >_<

 

[4piknup]

They are finished today. Were evo8 oem behive springs, retainers, collets, and valves (sodium filled exhaust)

Afaik they go on...