4g63 conversion help

[KNGGSR]

hey guys, im 99% finished my 4g63 conversion but the engine just doesent want to start, dosent crank and ive tested the ecu, its got no power to it at all, just wondering if eny of u guys no where i can get a wiring diagram for the 4g63 it would be much appreciated. cheers

 

[EVOCPE]

Does the reds go on??

Check all the fuses and relays??

Did you reconnect the white altinator wire back in the fuse box in the engine bay?? thats a common problem that people forget

 

[Liberoz]

Did you extend the alt wire to the 63 position and hook it up?

 

[KNGGSR]

yeh i did all that, all the reds in the cluster go on, the whole car has got power but the engine seems to be dead. wat else can be the problem?

 

[progkamol]

what sort of ECU u using???

 

[KNGGSR]

im usin a stock vr4 ecu dat came with the engine. If i could get a wiring diagram den maybi it wil help a little.

 

[EVO-00X]

Look in the tech sticky's in the VR4 section... Workshop Manual & Electrical Diagrams.

 

[KNGGSR]

tanks man il hav a look at it now. Cheers

 

[EVOCPE]

So is it just wynding but wont kick over? or just clicks???

any spark or injector pulse??

Battery fully charged??

 

[KNGGSR]

nothing at all, i which it winds over den maybi ill no wat the problem is

 

[EVOCPE]

Sounds like starter motor, is it earthed right?? should be a point on the gearbox and a point on the chassis rail

Also theres a single wire plug (just above the gearbox) that goes to the starter, make sure you have reconnected that

Ummm... check all earths are eathed where your ECU is

Dunno anything else lol, its hard coz im usually a hands on

 

[KNGGSR]

thanks alot for your help man, appreciate it.