4g63 Runners and Gaskets

[kypreo]

Hey guys does anyone know where i can get or if there is even a gasket(s) for Numbers 1 and 2......
The engine manual tells me there isnt any... but there would have to be something there!!!!!!

Just to recap its the ends of the runners.... one end to the plenum and the other to the first piece that connects to the head.
Picture below...

if anyone can shed some light on this please iam heaps confused! haha.. Maybe Part Numbers or a link on ebay would be nice too LOL...
Thanks heaps!!!

vr4 - 4g63t motor...

 

[JayRome]

Hey guys does anyone know where i can get or if there is even a gasket(s) for Numbers 1 and 2......
The engine manual tells me there isnt any... but there would have to be something there!!!!!!

Just to recap its the ends of the runners.... one end to the plenum and the other to the first piece that connects to the head.
Picture below...

if anyone can shed some light on this please iam heaps confused! haha.. Maybe Part Numbers or a link on ebay would be nice too LOL...
Thanks heaps!!!

vr4 - 4g63t motor...

that intake manifold is one piece..... that rib you see is the vac line for the PCV valve....

 

[kypreo]

Iam about to upload what i need specifically now...

I think i explained it shit....

 

[kypreo]

Is there a gasket here??
If so where can i get one, what is it called? anyone got an ebay link?
If there is not a gasket there what will go there instead it cant be metal to metal...

The runners connect to these parts...

 

[JayRome]

Is there a gasket here??
If so where can i get one, what is it called? anyone got an ebay link?
If there is not a gasket there what will go there instead it cant be metal to metal...

The runners connect to these parts...

ohhhh well the photo you first showed was of the ECI-Multi intake manifold..... they are one piece..

the above photos are of the Cyclone intake manifold from the J-specs 3 pieces and secondary throttles for low end torque.... they are usually upgraded to the ECI intakes for better flow... best to ask Travis and see if he has a listing for the gaskets for these.. if you ask any of your local parts place, they will have no idea. there
system only shows gaskets for the standard intake mani....

 

[kypreo]

How do I get in contact with Travis?
Thank you for clearing that up man....

 

[EVO-00X]

Yeah there are oem gaskets there on the japspec cyclone intake manifold.
Travis goes under the user name SIVART in this forum. He works for Mitsubishi and can order oem parts for you... if u ask him nicely that is.

 

[blackvr]

I've made one myself in the past out of proper gasket making sheet...

 

[kypreo]

How did that turn out man?

 

[kypreo]

I think im going to have to go down the make it myself route...... :/ Struggling to find a gasket!!!!!!!!!!

 

[Lister]

Use rtv sealant sparingly, should be fine.

 

[blackvr]

How did that turn out man?

Still going 5 years later. Took about 20 mins to make.

 

[kypreo]

What sort of gasket paper did you use? If you remember lol....

Yea i was looking into the sealants aswell id rather not go down that route... but if i have to i will.. :/