4g93 1.8 GTI injectors

[djpearson90]

Hi all.
Had a quick scan on here and not found exactly what I'm looking for...
My Proton Satria GTI has the 4g93 engine and needs two injectors replacing (may as well do all while on to it?).
The garage it's at (in the UK) is having trouble fonding them. But while the engine is used by many Mitsubishi models I thought it be easier to search using that rather than proton.

Does anyone know a part number for the injectors or what exact model a colt the same injectors come from.
Hopefully find someone in the UK which sells them!

Sent from my LG-H850 using Tapatalk

 

[BYBY5L]

What year is it? I think that they changed ecu's to seimens in 2002 or 2003, dunno if they changed injectors too
What colour are they?

 

[djpearson90]

Its a 2001 so before the ecu change. Its at a garage so not seen them myself. Apparently they're meant to be 240cc/min. Getting them here in the UK seems hard work, but was going to try going to mitsu direct...

Sent from my LG-H850 using Tapatalk

 

[evo-gsr]

Why not try Proton instead of Mitsi??

 

[djpearson90]

3month wait

Sent from my LG-H850 using Tapatalk

 

[djpearson90]

And it's a Mitsubishi engine....

Sent from my LG-H850 using Tapatalk

 

[4piknup]

If you are on the mitsi ecu already, upgrade to a later evo ecu and run whatever injectors you want

 

[djpearson90]

I have an ecu on the way thanks to evo-gsr there. Was going to wait a while to just get it running properly before doing mods (have more bits waiting to go on it). And no doubt will need more stuff for the ecu to work with it MAF etc?

Sent from my LG-H850 using Tapatalk

 

[BYBY5L]

They come in a few colours and I'm not sure what the difference is between them, but Ive seen white, pink and now black on the newer cars
Check the injector for a inp or part number if ya can

 

[djpearson90]

Okay, so finally got the 'Photon' running again.

The existing injectors were green. Got a new set (which needed refurbing anyway),
Still looking to swap these out as they are apparently notorious to failures...

Can anyone point the way to an upgraded or higher flow injector which will still fit stock rail and engine?

As mentioned, I'm in the UK, and it would seem these colours of injectors are different here. Doing a search for 'pink injector' wont get me very far!

 

[Ian91]

What size are you wanting to go to? I’m sure there’d be someone on this forum selling a set of evo injectors that would post to uk.

But they are only 510 or 560cc so depends what your after.

 

[4piknup]

What ecu did you get?
Almost all mitsi injectors fit. No point going too big if you don't need to.

 

[evo-gsr]

Factory ecu with TunerPro RT and Ostrich emulator.

 

[vr401]

Late evo 560cc best choice.

There is never too big with injectors.
You never know when you may need it.

 

[djpearson90]

Late evo 560cc best choice.

There is never too big with injectors.
You never know when you may need it.

Ended up getting some 560cc evo ones.
Double the flow rate of the standard ones, amd some. ☺

Sent from my LG-H850 using Tapatalk

 

[BMGTZ]

Factory ecu with TunerPro RT and Ostrich emulator.

that sounds very familiar.

 

[evo-gsr]

Indeed ^