lanceRRich
Member
right thought id ask you chaps on here wats needs to be changed on a 4g93 lancer gsr to fit a 4g63 for an evo3 not much info on this in the uk as theres not that many 1.8 gsrs over here
cheers
cheers
4g93 to 4g63 help
- Thread starter lanceRRich
- Start date
Help Support 4GTuner:
Dean
Member
If you had've looked at the sticky in the exact forum you've posted in, all the answers are there for you!
here: http://www.4gtuner.com/index.php?/topic/2906-2lt-conversion-faqshelp-ideas/
have fun.
here: http://www.4gtuner.com/index.php?/topic/2906-2lt-conversion-faqshelp-ideas/
have fun.
khubner1
Moderator
3 simple steps
1) buy front cut and rear diff if swapping from gsr to evo box (diff ratios are matched)
2) strip everything
3) transfer everything from your cut over
1) buy front cut and rear diff if swapping from gsr to evo box (diff ratios are matched)
2) strip everything
3) transfer everything from your cut over
lanceRRich
Member
can i not use the gsr loom and diffs and gearbox ? im just getting a petty bare 4g63 to build up no other parts just the engine parts
khubner1
Moderator
boxes and diffs yes but i recomend getting a evo loom and ecu there are plugs that are different
lanceRRich
Member
BMGTZ
Grumpy old man from the school of hard knocks
yes the GSR loom can be used...I have done that several times.
you will need to take the loom out out the plastic piec that bolts to the inlet manifold becuase the shape is wrong to bolt to the 4g63. after doing that every thing will just plug in.
because the alternator is on the other side now ....you will need to extend the wires for that and the oil pressure switch too.
its all in the link that is above.....
aircond........will be a challenge if you dont have the evo parts, because gsr stuff wont fit.
lanceRRich
Member
cheers for that mate as for the aircon im in lovely rainy england dont need air con over here
Similar threads
