8" wide rim on cc gsr

[captainTeeBag]

sorry to hijack this post but anyone got pictures of what these rims or similar rims would look like on a gsr?
http://a248.e.akamai.net/origin-cdn.volusion.com/5ehx2.gysj4/v/vspfiles/photos/53079542-2.jpg?1335541355
http://www.1010tires.com/images/wheels/super/XXR-521-Black_lg_super.jpg
http://sphotos-g.ak.fbcdn.net/hphotos-ak-snc7/3747_512015322155997_26655368_n.jpg

I'd be going with the last of those 3 they would look sik. Keep in mind though the pic of that rim is probably an 18x10 inch rim with about anywhere from 0-+15 offset. They do that so you start frothing at the massive dish!!

 

[romeo]

Not sure on offset but the last ones come 8.25 or wider I guess can't get them on a gsr

 

[evo-gsr]

Yeah you wont get them xxr's on a GSR for sure...they are a hot wheel but.

 

[4piknup]

Sorry its hard to see, but these are 7.5" on gsr guards with std camber. the tyres are 215/17s. You can see the lip is level with the sidewall on the tyre. there is barely a fingerwidth of room between tyre and strut upright, and tyre is still below bottom spring perch so no advantage with coil overs.

you will need evo front guards to run 8in on fronts

 

[romeo]

is there a way to tell if i have evo or gsr guards?

 

[khubner1]

evo front guards have flared wheel arches gsr don't if your running an evo 3 front the front bar will give it away as the flare is quite obvious behind the indicator

 

[romeo]

oh ive got a evo 2 bar not a 3, would the gsr gaurds be the same as the normal cc lancer cos i could compare them if they were

 

[khubner1]

yes

 

[captainTeeBag]

Anyone got any ideas how much for a NEW! Genuine e3 bumper then I need one and some guards. Will post in the wtb section I guess

 

[rvrftw]

Advanced jap autos have guards and front bar for sale.

Bear in mind that i have 17x8.5 rims with +35 offset (running a 215x40 tyre) and they still scrub on my evo front guards when cornering (i.e. when turning and springs are compressed). So don't expect the evo guards to help too much.

 

[4piknup]

Check out the wagon in for sale... what does he have like 18x9 or something on evo guards. ..

Looks nice

 

[evo-gsr]

Bringing this topic back up.

I have 17 x 8 + 35, Evo 9 Enkies, to put on my Evo very shortly..I will report back once they are on...Im really hoping that they will fit and not scrub with a 215 tyre!

 

[pad4g63]

U will have to do a bit of guard rolling in the rear and the bumper tab mod. I had 215/45/17 and they rubbed a bit but if I did it again I would go 215/40/17

 

[evo-gsr]

That makes me feel a bit better about it...I have previously done the tab mod and ground the guard lips back to level with the spot welds so I might be in luck..Thanks.

 

[NFG]

Bringing this topic back up.

I have 17 x 8 + 35, Evo 9 Enkies, to put on my Evo very shortly..I will report back once they are on...Im really hoping that they will fit and not scrub with a 215 tyre!

Posting in here 5 1/2 years later because I'm chasing info.....

evo-gsr, did you ever fit these wheels?

 

[evo-gsr]

Yes. And as I said in the other thread you posted in, they were way too close to the trailing arm, so they were unsafe and not able to be used.