Aftermarket radiators

[Hypo]

What have people done about the thermo fan when you have a aftermarket radiator.

I have mounted my ASI radiator and there is no way I can get the intercooler piping and a intake to the turbo plus the factory fan mounted.

Are you all running slim line davies craig fans?

 

[milkandoj]

Supercheap's own 'calibr'e branded fans, look like an identical rip off of Davis craig fans, or they are just re branded.

Lots of their calibre brand stuff is made by other companies such as injector cleaner made by nulon ect, and claibre brand stuck on the bottle, so it can be sold cheaper and also not have to price match.

That said some of their own brand stuff is junk but there's some good stuff to.

The slim line fans are quite thin!
I got a 10inch one in the garage, If measuring to the small peak on the backing plate its about 60mm, if you measure from where the wires come out at the back its 65-70mm.

12 inch would be a tad bigger.

They are also easily adjusted from push to pull fans by undoing the nut holding the fan on.

 

[evopwr]

whats the price difference b/w calibre and davie craig fans? are they both made in china-land?

 

[tUfRiCe]

im running a 10inch calibre on an asi ally rad with a pte6152r turbo an new cooler piping it seems to fit well

 

[Dean]

Davies Craig are the shiz.

 

[DOUGMO]

get a SPAL fan, nothing comes close to the cfm they flow

and they are flatter than davies craigs too

 

[OLDIE]

get a SPAL fan, nothing comes close to the cfm they flow

and they are flatter than davies craigs too

That's correct

 

[Hypo]

get a SPAL fan, nothing comes close to the cfm they flow

and they are flatter than davies craigs too

What size fan are you running on your radiator? 10 inches?

Can I just wire it into the current wiring and it will work?

 

[3zercrowd]

What have people done about the thermo fan when you have a aftermarket radiator.

I have mounted my ASI radiator and there is no way I can get the intercooler piping and a intake to the turbo plus the factory fan mounted.

Are you all running slim line davies craig fans?

Check my members rides out for how I fitted them!

 

[peasoup]

I got a 13" SPAL, bought it from Datsport in Adelaide, good service. That fan is only 52mm thick.