ARP head stud Part Numbers for 4G93T?

4GTuner

Help Support 4GTuner:

JETGSR

JETGSR

CAPTAIN BURRITO!
Joined
Dec 3, 2005
Messages
950
Location
Logan, Brisbane
I've done a bit of a search and cant seem to find if there is available ARP head studs for the 1.8ltr 4G93T motor also is there a metal head gasket available? If someone has the part numbers for these could they email them to me please. (this is not for my motor but a friends)

he has been told there is no listing for them.

There must be something that looks the same and smells the same.

Thanks in advanced!

JetGSR
 
I've done a bit of a search and cant seem to find if there is available ARP head studs for the 1.8ltr 4G93T motor also is there a metal head gasket available? If someone has the part numbers for these could they email them to me please. (this is not for my motor but a friends)

he has been told there is no listing for them.

There must be something that looks the same and smells the same.

Thanks in advanced!

JetGSR
 
I've done a bit of a search and cant seem to find if there is available ARP head studs for the 1.8ltr 4G93T motor also is there a metal head gasket available? If someone has the part numbers for these could they email them to me please. (this is not for my motor but a friends)

he has been told there is no listing for them.

There must be something that looks the same and smells the same.

Thanks in advanced!

JetGSR
 
For the Headgasket MD322823 is the P/N you want. (Factory piece in the CM5A GSR, but fits earlier CD5A too) This is a factory Mitsubishi multi layer metal gasket. Highly reccomended.


As for the head bolts. I'd just have em drilled out to 11mm and re-tap them so you can use Evo ARP Head studs ;) - I'm doing this in my Mirages 4G93T but using factory Evo Headstuds - will handle the 18-20psi I plan to force into it no worries 8)
 
For the Headgasket MD322823 is the P/N you want. (Factory piece in the CM5A GSR, but fits earlier CD5A too) This is a factory Mitsubishi multi layer metal gasket. Highly reccomended.


As for the head bolts. I'd just have em drilled out to 11mm and re-tap them so you can use Evo ARP Head studs ;) - I'm doing this in my Mirages 4G93T but using factory Evo Headstuds - will handle the 18-20psi I plan to force into it no worries 8)
 
For the Headgasket MD322823 is the P/N you want. (Factory piece in the CM5A GSR, but fits earlier CD5A too) This is a factory Mitsubishi multi layer metal gasket. Highly reccomended.


As for the head bolts. I'd just have em drilled out to 11mm and re-tap them so you can use Evo ARP Head studs ;) - I'm doing this in my Mirages 4G93T but using factory Evo Headstuds - will handle the 18-20psi I plan to force into it no worries 8)
 
The Part number i have for the Multi-layer stainless gasket is MD322820 and its out of the late model SOHC 1.8lt Lancer...
Part number might be different due to me being in Australia and Mitsubishi just being wierd :p

As for head studs / Main Studs you can use the ARP ones from a 3SGTE the part number is 203-4204.

The ARP's are worth about $200Au and the head gasket is about $80Au from Mitsubishi.

Thank You

Jason
 
The Part number i have for the Multi-layer stainless gasket is MD322820 and its out of the late model SOHC 1.8lt Lancer...
Part number might be different due to me being in Australia and Mitsubishi just being wierd :p

As for head studs / Main Studs you can use the ARP ones from a 3SGTE the part number is 203-4204.

The ARP's are worth about $200Au and the head gasket is about $80Au from Mitsubishi.

Thank You

Jason
 
The Part number i have for the Multi-layer stainless gasket is MD322820 and its out of the late model SOHC 1.8lt Lancer...
Part number might be different due to me being in Australia and Mitsubishi just being wierd :p

As for head studs / Main Studs you can use the ARP ones from a 3SGTE the part number is 203-4204.

The ARP's are worth about $200Au and the head gasket is about $80Au from Mitsubishi.

Thank You

Jason
 

Similar threads

LumpyVR4
ARP 625+ head studs
Replies
0
Views
2K
LumpyVR4
LumpyVR4
R
ARP parts install procedure for 4G93T?
Replies
11
Views
3K
evo-gsr
evo-gsr
Taz
Part numbers for E33A
Replies
2
Views
1K
Taz
Taz
svanh1993
4g93t engine build for gti stuck on a few choices
Replies
2
Views
781
svanh1993
svanh1993
S
  • Locked
FS: 2x HH VR4's + 4-bolt/EVO 0 gbox + other parts
Replies
10
Views
3K
stengah
S

Latest posts

Back
Top