boost tee

[jizah]

Hey guys, i have a gsr lancer. Previous owner installed a boost tee to pretty much standard car. I wanna take it out but im not sure where to run the original hoses? Any help will b appreciated thank u.

 

[moi]

after removing the boost tee proceed to join together the two hoses that previously went into the boost tee, use a plastic joiner or alternatively use a new complete hose

 

[jizah]

He had the hose disconnected from the solenoid. Currently has the hose from waste gate to nozzle on intercooler pipe. Nd from the turbo to the solenoid then the hose removed from the other nipple of solenoid. Took it for a drive still boostn 15 - 20 psi even wen the boost tee was installed im sure it was done wrong as it never responded to adjustment nd ran 10 - 20psi

 

[EV0300]

He had the hose disconnected from the solenoid. Currently has the hose from waste gate to nozzle on intercooler pipe. Nd from the turbo to the solenoid then the hose removed from the other nipple of solenoid. Took it for a drive still boostn 15 - 20 psi even wen the boost tee was installed im sure it was done wrong as it never responded to adjustment nd ran 10 - 20psi

you might need a factory solenoid.

 

[EVOCPE]

What do you mean from turbo??? the turbo shouldnt have a nipple, only the wastegate actuator

To run wastegate pressure just run 1 hose from the wastegate actuator nipple to the cooler pipe nipple, you might need to block a nipple on the turbo intake pipe though

Take some pics and show us the setup its currently got