Brakes

4GTuner

Help Support 4GTuner:

DZN60

Well-Known Member
Joined
Aug 25, 2009
Messages
270
Hey just wondering if these brakes i bought are gonna be any use? Would it be possible to just spin the caliper around and use it on the right hand side?As i was sold two left hand calipers one evo and one galant vr4 ?
 
you wont be able to bleed the air out correctly mate.

you need a rh and a lh of either of the two types of calipers you have.
 
DOUGMO said:
you wont be able to bleed the air out correctly mate.

you need a rh and a lh of either of the two types of calipers you have.

thanks for the info looks like ill be searching for a while ...who would sell just one caliper?
 
I posted in your other thread mate, but I may be able to get you a pair of rear EVO calipers that we purchased to put on a mate's CE coupe. He sold it before we fitted them up, so they should still be sitting around somewhere.
 
ENGINR said:
I posted in your other thread mate, but I may be able to get you a pair of rear EVO calipers that we purchased to put on a mate's CE coupe. He sold it before we fitted them up, so they should still be sitting around somewhere.


Really only want fronts......but are the rears much bigger then gsr items?
 
DZN60 said:
ill go searching tomorrow

We bought the calipers from a wrecker at Capalaba. He had a few cars there. Got them off a Verada.

They were perfect and didn't need repairing.

$40each.
 
Theres a thread on here somewhere about which verada's and also some magnas with abs, have the twin pots. I found it when i was doing the same upgrade. Pretty sure though as long as they are the twin pots you are fine.

A few other mitsis have simular calipers like the pajero but somone said you needed to modify (attack them with a grinder) them to fit so not worth it.
fto's also use the same pad, no idea if the claipers are swappable with evo though.

You'll love twins:p
 
milkandoj said:
Theres a thread on here somewhere about which verada's and also some magnas with abs, have the twin pots. I found it when i was doing the same upgrade. Pretty sure though as long as they are the twin pots you are fine.

A few other mitsis have simular calipers like the pajero but somone said you needed to modify (attack them with a grinder) them to fit so not worth it.
fto's also use the same pad, no idea if the claipers are swappable with evo though.

You'll love twins:p


Yeah just gonna keep looking around atm....held up the evo caliper to my gsr ones there is a fair difference in size:thumbsup:
 

Latest posts

Back
Top