cam specs: 61/61t/67/VR4.. i need em!!!

4GTuner

Help Support 4GTuner:

lancergsr4g61

Member
Joined
Dec 14, 2006
Messages
23
Location
Adelaide Hills, South Australia
as above i need the specs for the cams below :

NA 4g61
4G61T
NA 4G67
VR4 RS: i already have the spec for these cams, but chuck them up for comparsion sake..

i will soon have a set of each of these cams to go into a 4g61t, and i need to know the specs on all of them to gain the best maximum output with the sets that i have..

i know that u can use the inlet 4g61t cam and the VR4 exhaust, for a good increase, but just seein if there is abetter option...

Cheers

Matt
 
4G63T for the aus spec anyway

intake valve opens 21 degrees BTDC
intake valve closes 51 degrees ABDC
inatke valve duration 252 degrees

exhaust valve opens 57 degrees BBDC
exhaust valve closes 15 degrees ATDC
exhaust valve duration 252 degrees

valve clearance - hydraulic lash adjuster
 
i gues the turb inlet would be milder, to make up for waht little 'lag' there is... wouldnt be much tho..

if anyone has the total duration specs that would be F#$%in sweet!!!!
ideally i wanted some VR4 AMG cams, as they are 260/264 total duration, but i wanna get the best possible combo out of what i got...

as i will have 4 sets of cams soon....

Matt
 
i would have thought n/a cams would be an upgrade to the turbo engine....... hurm....
 
gsr galant
intake valve opens - 26 BTDC
intake valve closes - 46 ABDC
duration - 252

exhaust valve opens - 55 BBDC
exhaust valve closes - 9 ATDC
duration - 244

i.e 252/244 cams
 
Back
Top