Choice for Bolt-In Fuel Pump

[dj_konix]

Okay, so now im starting to get further into my build of my rvr and my dyno guy said i need to replace my fuel pump with something bigger (im running 650cc injectors, tomei fpr, td05-16g but upgrading to td06 soon!aiming for 22psi with good tune)

Bosch or Walbro? and what bolts straight in? i want no fuss install haha

Cheers
Shaun

 

[vr401]

Okay, so now im starting to get further into my build of my rvr and my dyno guy said i need to replace my fuel pump with something bigger (im running 650cc injectors, tomei fpr, td05-16g but upgrading to td06 soon!aiming for 22psi with good tune)

Bosch or Walbro? and what bolts straight in? i want no fuss install haha

Cheers
Shaun

Walbro is straight bolt on replacement. Same part number as for Galant VR4.

 

[CLuTZ]

I would stick with the TD05 you have man- they can make 220+kw atw, if you setup your car correctly- there's no point changing to a TD06 and only running 22psi- save your cash and spend it on an ECM link or some 264 or 272 cams or some 2.5" cooler piping or something

 

[dj_konix]

the 16g will not make 220kw, maybe if i changed to the 20g wheel but not the 16g, i've been told even at 22psi the td05 will do no more than 210kw

 

[milkandoj]

I would stick with the TD05 you have man- they can make 220+kw atw, if you setup your car correctly- there's no point changing to a TD06 and only running 22psi- save your cash and spend it on an ECM link or some 264 or 272 cams or some 2.5" cooler piping or something

+1
Id get everything else sorted first, get your 210kw at the wheels, have some fun, get the setup right, then you can decide what you want in a turbo, you may even want more than a small gain from a slightly bigger turbo and go bigger again, or enjoy the punch of the stock turbo.

otherwise your driving around on a biger turbo that isn't stretching its legs until the rest of the setup is sorted.

 

[CLuTZ]

the 16g will not make 220kw, maybe if i changed to the 20g wheel but not the 16g, i've been told even at 22psi the td05 will do no more than 210kw

Those RVR 16g's can do it I reckon- they are rated higher than EVO Big 16g's even.....

As long as the setup is efficient- it should do it! G5R5OL's car made 206kw on 19psi, on pump, and apparently Springy (where it was tuned)'s dyno reads a little low compared to the rest

 

[dj_konix]

i have kelford cams and arospeed cam gears too, just not installed yet

 

[MattL]

Kelford 272's? If so, they're my favourite, purely for the lumpyness down low.

 

[brettu26]

Those RVR 16g's can do it I reckon- they are rated higher than EVO Big 16g's even.....

i'll be able to confirm that soon enough. i have one arriving soon for my vr4:thumbsup:

 

[howc]

sorry to hijack the thread but does anyone know any online places selling authentic walbro fuel pump for the HSG?

Ebay is selling walbro for as low as 70+ so i think it might be fake.

Can anyone let me know the part no. of walbro fuel pump for HSG as well ?

 

[vr401]

sorry to hijack the thread but does anyone know any online places selling authentic walbro fuel pump for the HSG?

Ebay is selling walbro for as low as 70+ so i think it might be fake.

Can anyone let me know the part no. of walbro fuel pump for HSG as well ?

Walbro GSS342 Fuel Pump. 255 Litres/Hour.
I know Meek is selling them for around $180

 

[Astron Boy]

Just Jap is selling them also.
That's where I bought mine.

 

[Dean]

sorry to hijack the thread but does anyone know any online places selling authentic walbro fuel pump for the HSG?

Ebay is selling walbro for as low as 70+ so i think it might be fake.

Can anyone let me know the part no. of walbro fuel pump for HSG as well ?

Check out the sticky in the Car Parts For Sale Section mate.
Genuine's are available on ebay, but beware of the fakes.
Have a read here: http://4gtuner.com/site/showthread.php?t=3663&highlight=fake+walbro

 

[Astron Boy]

I bought one from eBay, was a fake, which is why it's simply easier to go with a store, as you have a point of reference if it goes pear shaped.

 

[howc]

i was gonna buy it from ebay initially but read thru the fake walbro post and backed out haha.

yea might visit meeks again.

 

[Dean]

LOL. Did you read it properly?
The first 3 lines have the answer

I CAN CONFIRM GENUINE WALBRO PUMPS ARE AVAILABLE THROUGH EBAY ID "UDDOG06" WHO GETS THEM PERSONALLY SENT OVER TO AUSTRALIA FROM THE U.S.

 

[Talonfiend]

A walbro 255(high pressure) is a good pump. I have a Evo 3 16g and I plan on getting my TSi up to 300hp-350hp(220kw-260kw). I just need a to get 2.5" FMIC, and a tuning device.

 

[vr401]

LOL. Did you read it properly?
The first 3 lines have the answer

I think I bought my AEM wideband, wallbro pump and AVCR from him too. If it's same person then he should be Indian background. Very good seller.

 

[howc]

yes i did read thru properly and i search thru the list of walbro seller but i dont see any seller name uddog06. searched his name but he is not listing any item at all.

 

[CLuTZ]

runuts might be able to source you one aswell, but it's not hard finding a reputable seller amongst the scum on ebay.