compatability

[CyBorG]

hey guys would any of the evo 1 2 or 3 parts b able to fit the c83a ...reason for asking is because i found a cyborg shell for sale but its missing the drive shaft and sub-frame ..the rear diff and axles are still intact ... was also wondering if i can use my 93t in it any advice would b great guys thanks

 

[CLuTZ]

Hey how you doing....

EVO parts wont work- you will need to find the right subframe for your model- you might be able to get away with just using a 4WD North/South cross member and a FWD subframe, but perhaps someone else can answer that 100%- craig maybe.....

As for shafts, i'm fairly sure you will need C73A/C783A shafts

 

[mrcyborg]

very few parts will work.
confused on the subframe missing? these models only run a north south cross member? is that the one missing? tail shaft would be very hard to find if its missing, but guess you could always get one made.

 

[CyBorG]

very few parts will work.
confused on the subframe missing? these models only run a north south cross member? is that the one missing? tail shaft would be very hard to find if its missing, but guess you could always get one made.

thanks for the reply guys....yes the north south cross member is whats missing...... **sigh** i would so luv to get this shell sorted out because there aren't any 4wd models here that are REALLY working....the guys down here tend to go the swift or nissan route and always downplay the colt ...i wanna show em what the mirage and colts can do...... the thing is i know someone with 4wd gsr parts .... where can i find pics of the c83a and gsr floor plans?

 

[killa]

hey you could try,

www.gsrcyborgclub.com

Theres a couple of guys on there with 4wd c83a who might be able to help you out with some floor pan pics

Also

www.4g61t.org

Theres quite a few americans who have converted their c83a to 4wd with very detailed info/pics of the process. Might be useful to you also.