Dirty,dirty transfer case.

[JAP63]

Ok,my transfer case(90 Deg drive) is dirty,its covered in oil (clean fresh oil),if i look down the back of the motor near the firewall it has a rubber nipple on top of it,Which i presume is a breather??
Anyway its got oil coming out of it and its covered the transfer case in a film of oil and its bad enough to leak now,out and onto the ground.

Did the oil bout a month ago...Could i have put too much in it and the breather is getting rid of the excess.

I sat on the highway for about 15 min last night coming home late at a very high speed....Too much oil combined with high rpm=gettng rid of the excess through breather?

Thanks..

Jamie.

 

[bazeng]

how did u fill it up?
from the fill hole or from the breather hole?

u should be filling it up with the fill hole on a level ground, once it starts spilling that should be it..

 

[rob323]

Does the breather have the rubber cap on top of it?

 

[BobWrinkle]

check out pics on vfaq.com

 

[JAP63]

I filled it up as per the VFAQ
I used a funnel with a long hose,down through the engine bay from memory.


And yes there is a rubebr cap on the breather.