Electronic Adjustable Suspension 0n a VR-4

[Dasithkg]

hi everybody!

Was wondering if anyone has ever tried putting Electronic Adjustable suspension from a Galant GSR to a Galant VR-4

Any0ne?

Cheerz,
Dasith

 

[to4garret]

that would be a total pain in the ass, there is a huge air tank that sits in the drivers wheel arch, right where the intercooler piping of the VR4 is, also there is a large valve body that sits above the gearbox, then all the assosicated wiring, which would need to stripped from a GGSR loom, then try and find new adjustible GGSR shocks would be very expensive, plus they're shit even from factory.

i dont know if the GGSR included a stepper motor on the shock body to change the shock valving, all i know is its definatly height adjustible.

i wouldnt bother, get some teins and there shock controller...

 

[Dasithkg]

nahh i wasnt gonna do it. Was Just curious to know if anyone has tried it! Jst thought there must be someone mad enuf to have a go at it!

 

[to4garret]

maybe JayRome! hahahaha

 

[Dasithkg]

maybe JayRome! hahahaha

lol Jay already had them in his Galant.... its a GSR originaly...... but now its the Jayrome Special Edition... so he removed them...


and i did a google search about those teins you mensioned, and found a forum where the guys were saying tein doesnt make them for VR4...

 

[DOUGMO]

edfc can go onto all teins, so if you can get teins for a vr4 still you can get it

 

[Dasithkg]

edfc can go onto all teins, so if you can get teins for a vr4 still you can get it

problematic though......

apparently Tein doesnt make for vr4 anymore...

and according the following chart, edfs cannot be installed becoz of space issues.. - check the front "notes" column

http://jaydm.com/tein/edfc2.htm

 

[DOUGMO]

bugger