Engine Rebuild Kit

[Biggidy]

Would this be suffice to rebuild my 4g63t RVR engine?

http://www.ebay.com.au/itm/95-96-2-0L-Eagle-Talon-Turbo-4G63T-Rebuild-Engine-Kit-/280388019806?pt=Motors_Car_Truck_Parts_Accessories&hash=item41486da65e

http://www.ebay.com.au/itm/95-96-Eagle-Talon-Turbo-2-0-Engine-Rebuild-Kit-4G63T-/260490471111?pt=Motors_Car_Truck_Parts_Accessories&hash=item3ca67126c7

 

[dj_konix]

they are quite cheap but i dont know the quality =/ you get what you pay for is the saying

I got my engine rebuild kit through spool imports here in australia, cost me $1400 but came with forged cp pistons, spool rods, acl race series bearings, ARP rod bolts, cometic MLS head gasket etc

 

[milkandoj]

come on man, $244 with pistons and all, don't be a cheap skate! A new car costs more than that for a service!
At least get all ACL stuff.

 

[Biggidy]

come on man, $244 with pistons and all, don't be a cheap skate! A new car costs more than that for a service!
At least get all ACL stuff.

It comes with acl stuff

 

[to4garret]

Well, the ebay auction actually states it could be ACL or Kings, not garranteed one or the other.


im not sure if i would trust an aftermarket front cover though, thats your oil pump. i dont have an issue with aftermarket waterpumps but the front cover is probably far more important.

ACL mains and rod bearings, ACL rings, ARP head studs (rod bolts and main bolts if you want), revised lifters, cometic head gasket, balance shaft eliminator kit, new stem seals (maybe guides), oem front cover, new water pump pulleys and auto tensioner. you shouldnt need pistons unless you shattered them.

why exactly are you wanting to rebuild your motor?

 

[Biggidy]

Well, the ebay auction actually states it could be ACL or Kings, not garranteed one or the other.


im not sure if i would trust an aftermarket front cover though, thats your oil pump. i dont have an issue with aftermarket waterpumps but the front cover is probably far more important.

ACL mains and rod bearings, ACL rings, ARP head studs (rod bolts and main bolts if you want), revised lifters, cometic head gasket, balance shaft eliminator kit, new stem seals (maybe guides), oem front cover, new water pump pulleys and auto tensioner. you shouldnt need pistons unless you shattered them.

why exactly are you wanting to rebuild your motor?

Have a bearing knock on piston 1.