Expression of Interest: Boot install out of my CC GSR
Price or Offer Range: Looking for $400 for the boot install (sub enclosures and flase floor), But am open to any serious offer.
Location: Canberra - can post (have sent similar sized items to VIC through e-go for not to much $$), If you in the local(ish) area, I'll even install it all for you.
Contact Details: PM or email [email protected]
Terms: Direct deposit/paypal - buyer to pay shipping costs.
Information:
Thinking of selling my current audio set-up. Just won the state championship title in it's class (MEASQ). I made this myself (with the help of some mates). The enclosures are made of fibreglass with with a mdf mounting ring, covered in Zandtex vinyl. The inside has been coated in dampening compound and the has acoustic filler. The floor is made of 18mm mdf (iirc) and covered by the same vinyl as the enclosures, with mounts/holes for 3 amps (specifically polk carbon series)
I'm also willing to sell in any variant of the bellow:
1.
If your only after the sub boxes, I'll give you the dimensions for the floor section so you can make a flat false floor (The covering is easy to get a hold of). $350obo
2.
If you are after the whole boot set-up:
-2x Polk Audio Signature reference 12" sub-woofers
-2x Polk Audio Carbon C300.2 2ch Amplifiers (1 for each sub)
-1x Polk Audio Carbon C400.4 4ch Amplifier (just running the front stage in my car)
-Custom fibreglass enclosures on each side of the boot, trimmed in black zandtex vinyl.
-Custom floor panel to house the amps at a staggered 45degree angle, again trimmed in black zandtex.
Then please shoot me an email/PM with an offer. But please remember that the RRP on the amps/subs is close to $5k and countless hours/bourbons have gone into the fabrication.
3.
If your after the complete speaker/amp package, I'm willing to sell the front set-up also. They are Polk audio Signature reference 6.5" splits, with custom pods for the tweeters on the dash (no holes need to be drilled) and the mid-woofers fit into the factory location easily enough (evo door cards, no cutting required). shoot us a PM and well work something out.
Photos:
Can get better (much larger) hi res photos for those seriously interested.
Price or Offer Range: Looking for $400 for the boot install (sub enclosures and flase floor), But am open to any serious offer.
Location: Canberra - can post (have sent similar sized items to VIC through e-go for not to much $$), If you in the local(ish) area, I'll even install it all for you.
Contact Details: PM or email [email protected]
Terms: Direct deposit/paypal - buyer to pay shipping costs.
Information:
Thinking of selling my current audio set-up. Just won the state championship title in it's class (MEASQ). I made this myself (with the help of some mates). The enclosures are made of fibreglass with with a mdf mounting ring, covered in Zandtex vinyl. The inside has been coated in dampening compound and the has acoustic filler. The floor is made of 18mm mdf (iirc) and covered by the same vinyl as the enclosures, with mounts/holes for 3 amps (specifically polk carbon series)
I'm also willing to sell in any variant of the bellow:
1.
If your only after the sub boxes, I'll give you the dimensions for the floor section so you can make a flat false floor (The covering is easy to get a hold of). $350obo
2.
If you are after the whole boot set-up:
-2x Polk Audio Signature reference 12" sub-woofers
-2x Polk Audio Carbon C300.2 2ch Amplifiers (1 for each sub)
-1x Polk Audio Carbon C400.4 4ch Amplifier (just running the front stage in my car)
-Custom fibreglass enclosures on each side of the boot, trimmed in black zandtex vinyl.
-Custom floor panel to house the amps at a staggered 45degree angle, again trimmed in black zandtex.
Then please shoot me an email/PM with an offer. But please remember that the RRP on the amps/subs is close to $5k and countless hours/bourbons have gone into the fabrication.
3.
If your after the complete speaker/amp package, I'm willing to sell the front set-up also. They are Polk audio Signature reference 6.5" splits, with custom pods for the tweeters on the dash (no holes need to be drilled) and the mid-woofers fit into the factory location easily enough (evo door cards, no cutting required). shoot us a PM and well work something out.
Photos:
Can get better (much larger) hi res photos for those seriously interested.
