EOI: Calder Park 2 day Time Attack Event

4GTuner

Help Support 4GTuner:

Entaran

Well-Known Member
Joined
Mar 29, 2005
Messages
5,215
Location
Ballarat, Victoria
Will be run fri/sat midyear.

Full national circuit (not the club circuit)

Open to anything powered by a 4g, FWD/AWD/RWD, cars will be classified later. Registration not required, scruitineer's check is required. All mods will need to be disclosed so we can categorise you properly. We will also have a 10 car bracket (maybe 20, depends on EOI??) for 6g powered vehicles... 6a12/6a13/6g72/6g74. The only caveat is that all entering vehicles must either be forced induction, or dyno sheet proven high powered N/A's (So that we don't have to classify 1.5 litre carby fed 4g15's into a category)

Approximate cost would be $300 for BOTH DAYS. (As in $150 a day).

We're estimating you'll get over an hour of competitive laps in per vehicle across both days. Along with individual events on day 2.

I need serious EOI's. Who would be willing to foot 300 bucks for 2 days of crazyfun @ Calder.


-- This is an EOI, I've not booked the track yet as we are still trying to figure out how many cars we can get from the 4g/6g clubs around Australia and how much $$ we need to dig up from sponsors to cover the difference. Breakeven is 70 cars. Max amount of cars we can field would be around 80 cars with decent tracktime amongst them. This is mostly early planning stages, I won't lie to you about it and is being run by Team4g.com (now 4GTuner.com).

---

THIS IS NOT A DISCUSSION THREAD, THIS IS AN EOI THREAD. THE DISCUSSION THREAD IS HERE



---



EDIT:

This is now an EOI circuit work thread. Calder, Sandown, Haunted Hills. Want to do a club day with 4gt? Post up here.

No longer calder specific.
 
if you have an events day as discussed on msn..

i will put my name day for events only no trackwork... cost ~$200 ?

Events:

Stampede :

start at 100m point away from a 'donut' u basically try and drift around it doing 2 full donuts.. then u head off in the other direction and cross the line

Go To Whoa:

start a 100m point, launch away and try to stop on a line.. be the fastest and u win :)

Slalom:

manouver thru 4-5 corners with fastest elapsed time..

:)

Jon
 
Entaran said:
1. Entaran (Lawrence)
2. marinetowing
3. jstyle (Jon)
4. gsrsol (Dan)
5. p3akin (Peter)
6.
7.
8.
9.
10.

im in.. have you got a picture of the track?

also, what are calders requirements?

obviously no flammable pants and helmet etc, but the other ones that are not common across all the tracks in vic, such as fire extinguisher and tow hook etc.
 
It's run under CAMS regulations so Full body clothing, approved helmet, shoes (no thongs/sandals anywhere in the venue apparently). Fire extinguisher, but not a Halon one. Nothing MAJOR.

1. Entaran (Lawrence)
2. marinetowing
3. jstyle (Jon)
4. gsrsol (Dan)
5. p3akin (Peter)
6. Jonson (Jon)
7. oscar (Jaimie)
8. peasoup (?)
9. enginr (?)
10.
 
Entaran said:
Open to anything powered by a 4g, FWD/AWD/RWD, cars will be classified later.......................................for 6g powered vehicles... 6a12/6a13/6g72/6g74. The only caveat is that all entering vehicles must either be forced induction, or dyno sheet proven high powered N/A's (So that we don't have to classify 1.5 litre carby fed 4g15's into a category)http://4gtuner.com/site/showthread.php?t=16643

Narrow minded to say the least

The whole idea unless you are combining it with someone else's track day is help all members gain experience not start to divide them due to you cant be assed putting them in groups

BOT: I have other work racing commitment in Sydney that weekend other wise I'd be in

as for a 4GNats that should be a definite.
 
Which weekend? We havent' specified one mate. Haven't even rung calder to check calendar dates yet.

And it's not me being narrow minded, let me explain...

In the simplest terms, assume we only get one group of 10 FWD's. Some are say, Cordia's which are ~120kw or something. *off the top of my head*, assuming nothing is stock anymore. Assume one or two are an FTO and so forth. Then yeah that's an ok group. BUT, throw a bog standard FWD lancer 1.8 into this mix, you have cars that are significantly faster than it on the track at the same time. Unless the 1.8 driver is experienced (unlikely from anyone at the track tbh) this is a recipe for disaster.

At least that's my opinion, I'm open to thoughts on it in the other thread.
 
So full circuit, you came around the back and enter on at the very start of the dragstrip?

I thought once it was now a full time dragstrip and circuit was closed?

That would be a VERY long front straight!! leading into a hairpin

Rules are harsh man, will have to upgrade my footwear

350__2_TMTD08BLKF1600M.jpg
 
interested

I dont think my car will have enough legs for the straight though:thumbsdown:

oh well Id still be keen:thumbsup:
 
yeah ive heard about that straight.

need to get my speed limiter removed for the straight i think because i was already on about 160-170 on the winton straight.
 
I would do this but there probably wouldnt be a class for me at all as i have a ch vrx 2.4l fairly standard as im on p's only things i could go up against is some RA colts. but if there is a class im in.
 
Entaran said:
Which weekend? We havent' specified one mate. Haven't even rung calder to check calendar dates yet.

And it's not me being narrow minded, let me explain...

In the simplest terms, assume we only get one group of 10 FWD's. Some are say, Cordia's which are ~120kw or something. *off the top of my head*, assuming nothing is stock anymore. Assume one or two are an FTO and so forth. Then yeah that's an ok group. BUT, throw a bog standard FWD lancer 1.8 into this mix, you have cars that are significantly faster than it on the track at the same time. Unless the 1.8 driver is experienced (unlikely from anyone at the track tbh) this is a recipe for disaster.

At least that's my opinion, I'm open to thoughts on it in the other thread.

I hear what your saying, but easily rectified. Just have groups organised by what times they have done previously or in a prolog easy then everyone will br grouped by speed which is the safest way to run different class/modifications of cars in a speed event.
For eg. I know of a mirage Cyborg replica thats 1600cc frt'wd that would probably pick off 63t awd lancers ect.


p3akin said:
yeah ive heard about that straight.

need to get my speed limiter removed for the straight i think because i was already on about 160-170 on the winton straight.

Peakin: To remove your speed limiter , remove cluster from dash 4 philips head screws
to remove cluster out of dash once cluster surround is out and cluster screws are removed, simply tip the top of cluster forwards almost Flat and it will come straight out. You may have to tilt steering wheel all the way down if you normally run it in the high position.
On the rear of your cluster there's is a RSM printed on the circuitry floppy board, right next to this is a small Philips head screw, remove this screw and you eliminate your factory 180km speed cut easy :drool:
 
Liberoz said:
Peakin: To remove your speed limiter , remove cluster from dash 4 philips head screws
to remove cluster out of dash once cluster surround is out and cluster screws are removed, simply tip the top of cluster forwards almost Flat and it will come straight out. You may have to tilt steering wheel all the way down if you normally run it in the high position.
On the rear of your cluster there's is a RSM printed on the circuitry floppy board, right next to this is a small Philips head screw, remove this screw and you eliminate your factory 180km speed cut easy :drool:


awesome. i will do it tonight LOL! thanks.
 

Latest posts

Back
Top