Eoi:*parts added* vr4 turbo package

4GTuner

Help Support 4GTuner:

Gianni

Well-Known Member
Joined
Oct 14, 2008
Messages
2,433
Location
Melbourne
I was going to turbo my cb gsr over xmas. But have decided to upgrade to a new daily. So I'm going to sell the vr4 turbo kit I was going to use. Everything needed for a non turbo motor. Or if your the kit in general. All parts came off a running vr4.

Td0516g with lines
4g63 mani
Dump pipe
2.5" exhaust (up to fuel tank)
Lotus twin tip muffler
Vr4 cooler pipes,
vr4 throttle body,
Vr4 cooler
Vr4 injectors
Vr4 ecu
Vr4 MAF
Vr4 intake pipe
Vr4 cams
Metal bov
Stock boost control solenoid
Fuel pressure solenoid
Oil pump,
Oil cooler and stock lines
Water tap with water sensors ect.
$1000 the whole lot

I also have another td05 16g with a screamer pipe. Number match an evo1 and the exhaust housing is brand new with larger wastegate flap and exhaust ports, 17psi actuator (also has a 20g comp housing and wheel to go with it to upgrade) $600

Evo3 injectors $150

Evo3 intake mani and new gasket $150

A spare non turbo 2L $400

And a pair of microtech ecu's $250 each
Hand controller and loom $100 (or $50 with ecu)

Gsr fiberglass spoiler with cracked light $50
Cc coupe rear bumper $40
Small drift pod filter 4" $30 new
2x vr4 crank angle sensors (fit evo1-3 also) $50 each
Vr4 fuel rail $50
Gsr front calipers $50 pair
4x Cc/cb/vr4 starter motors (will check working if people interested) $50 each
Magna oil cooler + m16 banjo bolts $50
2.5" Oval muffler with baffles removed $100
Random 4g63 timing covers top and bottom $50 each or $25 with other parts
Gsr rad fan $50
Vr4 blue ignition leads $50
Evo3 steering rack $150
2x set crank/alternster/ps pullies off 4g63 $50 set
Vr4/cb clutch slave cyl $20
Vr4 power steering pump $50 (brackets for it are around too)
6 bolt na flywheel and clutch (unsure of condition) $100
6 bolt turbo clutch kit *condition unknown* $50

Smaller items can be posted.
I can post the conversion kit if needed. But prefer pick up
Postage at buyers expense
All items located templestowe, Melbourne

P.s. I am also selling my cb gsr hatch soon if anyone is interested pm me :) I can include the turbo kit for a serious buyer
http://www.4gtuner.com/topic/21568-vehicle-mitsubishi-cb-gsr-hatch-red-beast-1991/page__fromsearch__1
 
I've personally never used them.
The lt-8 came off a gsr with a 2L running 11sec I parted out

The mt-8 I bought for the hand controller when I was going to use the lt-8. That came our of a vr4 :)

If assume the lt-8 had a dyno tune and can't say with the mt-8
 
I'm not splitting that package yet. Unless there is enough Interest in other parts.

The screamer pipe I can split but is on hold till tonight for someone. Ill see if I have a spare standard dump though
 
Jap spec looks like this...

http://us1.webpublications.com.au/static/images/articles/i19/1931_13mg.jpg
 
That looks like it :) but mines painted black and the brackets for mounting are different from memory. But inlet and outlet and size look about right
 
Cool, I might be interested, if you can get pics of both sides of the cooler that'd be awesome.
 
Will do. But like I said not entirely sure I want to split the package yet. But I'll keep you as dibs on it if I do go down that path
 
thanks gianni let me no asap, coz im in eltham and i no that ur close coz ive been to ur house :)
 
Yeah bro. Will do. Didn't look like I had a spare standard dump. But I'll let you know to orris if the screamer is up for grabs :)
 
Bump

Sorry oy alternator I had I have pulled apart last year. Can't remember why. You can have it for free if you wanna try it :)
 

Latest posts

Back
Top