EVO 1 Plumbing & VR4 RS Cooler

[mimmo_gsr]

Hey All,

Well my GSR has been sold and now the associated bits I collected but never made it on the car are for sale.

VR4 RS Intercooler $265
EVO 1 RS Intercooler Plumbing $200
2" Mild Steel Mandrel Bends $65

Pick up if in Perth, or buyer pays shipping cost.

PM me if you have any questions

Mimmo

 

[omni]

do you have pics of how the piping would bolt up?

 

[mimmo_gsr]

Hi Omni,

Sorry mate no pics of how the plumbing would connect up but I will try and explain it.

Essentially its the same as it would bolt up in an EVO, and I do have all the bits (they are just not in the photo).

Whilst working out a means to fit it in the GSR, behind the GSR front bar the method I was planning to use was to run a straight pipe (not pictured) under the cooler from left to right across the front of the car and with a few elbows connect it to the top right.

Then with a silicone connection & a steel flange join the left outlet to the pipe pictured above it.

The pipe across the bottom fits neatly in the GSR lower lip, the only issue I could forsee was kerb damage, but an impact great enough to damage the pipe would destroy the front bar anyway :/

Others have gone across the top of the cooler, cut a hole in the right (passenger) radiator support & plumbed it back over the Turbo. Thats what the mandrel bends were for, to do a custom plumbing job.

Mimmo