Evo 3

[chino e3]

Hey guys ..Im looking to aquire a full set of Kyb agx for my evo 3.....Would any one be kind enough to provide me with parts #....would this setupbe comfortable? suggestions r welcome...thanks

 

[Qik-1.8]

are you talking coilovers?
im guessing

 

[chino e3]

are you talking coilovers?
im guessing

yes coilovers

 

[Lister]

The KYB Agx series form memory was only a shock absorber not, a coilover. Great adjustable shock though. Never sold for the 2g Mirage, but no reason you couldn't fit the 3g mirage ones with 2g mounts

 

[chino e3]

The KYB Agx series form memory was only a shock absorber not, a coilover. Great adjustable shock though. Never sold for the 2g Mirage, but no reason you couldn't fit the 3g mirage ones with 2g mounts

lister thats right man....they r shock absorbers.....do u know where i could get a set that will fit the evo3...also parts#.......i could def try the 2 g mounts

 

[Lister]

Part number from memory is 741033. This is for a 3rd gen mirage. The rears should be a guaranteed fit, fronts I'm 90% sure if you fit the 2nd gen strut tops off a mirage they should fit (this may need trial and error to sort out). The E3. Hard call but, the guys on mirage performance would know. Just need to remember Evo 1,2,3 suspension are basically 2nd gen mirage. Except for front and rear sway bars, and spring heights/rates.

 

[chino e3]

Part number from memory is 741033. This is for a 3rd gen mirage. The rears should be a guaranteed fit, fronts I'm 90% sure if you fit the 2nd gen strut tops off a mirage they should fit (this may need trial and error to sort out). The E3. Hard call but, the guys on mirage performance would know. Just need to remember Evo 1,2,3 suspension are basically 2nd gen mirage. Except for front and rear sway bars, and spring heights/rates.

thanks much lister but is the part number for the front rear or both.

 

[Lister]

Thats the part number for both, the front and the rear. Like I said I'm confident the rears will fit, but the fornts could be a trial fit to see if they will work.

 

[chino e3]

Thats the part number for both, the front and the rear. Like I said I'm confident the rears will fit, but the fornts could be a trial fit to see if they will work.

cool thanks much

 

[chino e3]

cool thanks much

would some BC coilover from a evo 4 fit a evo 3....

 

[Lister]

Doubtful as the front camber tops would not suit. You could always order evo 3 BC coilovers. They aren't uncommon.

 

[chino e3]

Doubtful as the front camber tops would not suit. You could always order evo 3 BC coilovers. They aren't uncommon.

Found the set for the Kyb agx set 150087.....front left and right 73010 n 734011 rear 741033....

 

[EVO-00X]

Just remember that the EVO II/III uses a sway bar link that mounts to the strut/coilover body... its not like GSR/EVO I or other conventional mcpherson strut setups where the sway bar mounts onto the lower control arm.
Also as Lister said, the 96+ Lancers have 3 bolt strut towers and EVO I-III have 2 bolt. You could change the strut top camber tops if you can find something to suit, however you'll still need a strut where the sway bar link can bolt onto the strut.