evo engines into the cc gsr??

[GSR93]

hey people just wanted to know if the evo 6 motor could fix into a gsr does anyone know if so wat kinds of mods whould i have to do?

 

[SIVART]

it would be cheaper to buy a evo 6

but you can fit a vr4 or evo 1/2/3 engine in easyer
http://4gtuner.com/forums/viewtopic.php?t=3654&start=0

 

[DOUGMO]

i was looking under a 6 the other day and i would not be suprised if the whole front crossmember would bolt into a gsr/evo 1-3 fairly easily.

the only problem then is matching it to the rear with the right ratios etc...

the evo 1-3 setup is better balanced anyway because of the gearbox
being on the same side as the driver

 

[GSR93]

yea i might go for the evo 3 engine but i just wanted to find out if whould fit or not lol wat about using a evo ecu in a 4g93t gsr whould that work??

 

[DOUGMO]

i believe you can if you have the evo injectors and air flow meter

 

[Richard]

I don't wanna be to harsh but have a good read of the forum, what you are asking has been asked and answerd to death. There is heaps of opinions, tips, pictures, etc on the 20 or so pages of just this section of the forum

 

[EVO85]

the evo 1-3 setup is better balanced anyway because of the gearbox being on the same side as the driver

As far as I knew, Mitsubishi turned the engine around when the Evolution 4 was introduced to provide a better balanced chassis and reduce understeer...?

 

[DOUGMO]

have a look at some serious evo4 onwards race cars and they will have been converted to lh drive

ralliart used to do it too

 

[GSR93]

cheers for your help people

Richard Posted: Thu Apr 03, 2008 8:36 pm Post subject:

--------------------------------------------------------------------------------

I don't wanna be to harsh but have a good read of the forum, what you are asking has been asked and answerd to death. There is heaps of opinions, tips, pictures, etc on the 20 or so pages of just this section of the forum

20 page thats heaps lol sorri dude next time i will try and read and stop being lazy

 

[BMGTZ]

yea i might go for the evo 3 engine but i just wanted to find out if whould fit or not lol wat about using a evo ecu in a 4g93t gsr whould that work??

evo 123 ecu and 609 evo afm will simply plug in on a gsr....but you have to change the injectors too. its a good upgrade when combined with a bigger turbo.

brian

 

[GSR93]

wat size injectors 550cc how much do they go for??

 

[BMGTZ]

wat size injectors 550cc how much do they go for??

510 cc injectors.....watch the forums they got fairly often. prices vary

bm

 

[GSR93]

whould the evo3 ecu plug n play or do u have to rewire it?

 

[BMGTZ]

whould the evo3 ecu plug n play or do u have to rewire it?

it will plug in and work.........BUT..you must have the right afm{evo 609} and injectors{510cc}.
the computer wont know what to do with the information its receiving if you have the wrong afm

bm










[

 

[CLuTZ]

whould the evo3 ecu plug n play or do u have to rewire it?

evo 123 ecu and 609 evo afm will simply plug in on a gsr....

 

[shadow]

If you check the for sale section:

609 air flow meter and evo ecu $350.00 plus postage

http://4gtuner.com/forums/viewtopic.php?t=9178