Evoscan won't read AFR for AEM UEGO

[White Knight]

Calling the brains trust here, although I should just pm Mio...
But I thought I would consider everyone's experience.
I have evoscan running and reading from my E6 through the OBD, no dramas. However, try as I might I have had no luck in logging AFR with it. I have checked ground, connections and even tried plugging USB in prior to opening evoscan to no avail. Grrr!!!
Also checked com port matches. Iam using AEM 30-4110 UEGO controller gauge type.
Thanking you in advance. Cheers.

 

[vr401]

How did you connect aem to laptop?

 

[White Knight]

RS232-USB converter from leading edge. Computer says that it is working correctly. Install all done, redone twice to make sure as well....

 

[vr401]

Go to your settings and make sure that com port for it is set to com3 and also on evoscan

 

[White Knight]

Com 3? OK, will try it out mate.
I had the com port on 2 and also in evoscan. Will let you know tomorrow.
BTW, its evoscan 2.9. Although I don't think that matters much.

 

[vr401]

Also try all usb ports on your laptop. Mine for some reason wouldn't work on some sometimes.

 

[White Knight]

Yeah right....
Seems to be a common problem with wideband with evoscan hey. I've googled heaps before requesting help on the forum. I should have stayed with the E8 ECU and hardwired onto pin 75 or whatever it is...
I'll try different ports and (as suggested on a separate forum) plugging Tactrix cable and wb cable at same time as well. Seems odd but worked for one guy!
I will also make sure I get good voltage from the wb again.

 

[Benzo4gT]

When first connecting ECMlink, I used COM5 with one laptop when connection was an issue, then when a different computer was used it was back to COM3................go figure

 

[vr401]

It shoud be between com1 to com3. Nothing above that but many times computer assign different port and you have to manually change it.

 

[White Knight]

Sorted!!!!
I checked the advanced options of com port and changed the Flow Control to "Hardware" and is now logging AFR's well.
Thanks to all for the suggestions/ideas. Much appreciated.

 

[Benzo4gT]

Awesome mate!