flywheel help

4GTuner

Help Support 4GTuner:

mrcyborg

Well-Known Member
Joined
Apr 16, 2006
Messages
894
Location
Adelaide
hey guys,
i have found these XTD clutch kits from the US which i think i might give a go.
they are clutch and flywheel packages.
now, i have a rvr 7 bolt engine to go into an awd c73a mirage.
the current flywheel i have for it is an evo 2 or 3 style one and i am told the vr4 one is the same but 6 bolt, but the evo and cc lancer gsr one are all the same.
my question is, which US model car also has the same flywheel and clutch? they have listings for talons and all.
what fits?

cheers simon.
 
Ok firstly the GSR 4G93T and EVO 4G63 flywheels ARE NOT the same...

Talon or Eclipse would be what your chasing i believe... They usually state wether the 4G63 is either a 2G or 7 bolt and that is what you want.
 
well i didnt know that, whats the diff?
i know the cyborg one is the same as a vr4.
and was told the vr4 is the same size as evo, is that right?
what model,year talon or eclipse am i looking at?

cheer simon.
 
mrcyborg said:
well i didnt know that

Thats why i was making the point very clear you dont wanna make that mistake. the spacing on the bolt are different and the backing where it bolts to the crank doesnt match either.

The VR4 and EVO Flywheel are the same size but the bolt pattern doesnt match so thats no good to you.

I'm not 100% sure on the years of talon/eclipse's you should be looking at but if i had to take a guess i'd say '92 - ~'96. Like i say see if they state that its a 2G part because thats what your looking for.
 
but are all the 2g ones the same size? like fwd or awd or what? like different model over her might have come with different flywheels and all.
 
Back
Top