Found: Universial Front Mount Intercooler *URGENT*

[dkGSR]

As above I'm after a slim front mount asap.
Must be in good nick or new.
After a size smaller than 600x300 so it can fit behind an Evo 2 front bar without shaving the bar.
Not sure as to what exact size at the moment but please PM if you can help me out.
Or even if you know of a place I'd be able to pick one up in the South East areas.

Thanks.

 

[Richard]

I have a Evo 6.5 intercooler I doubt I will use, I want $300 for it.
They fit behind the Evo front bar, it is a bit taller than the stock EI-III one but still fits.

 

[dkGSR]

Yeah I would but not sure that the outlets on the cooler will suit the piping.
Running a Plazmaman kit.

 

[Dean]

If you're running the Plazmaman kit, most likely you will need a genuine cooler, because the Plamaman piping is a direct stock replacement AFIA

 

[dkGSR]

Genuine Mitsu cooler?
The Plazmaman kit I'm running is the Plazmaman GSR kit made to suit a larger front mount.
The piping differs to the standard evo piping.
I think I'll need a 550x180 roughly.

 

[Dean]

Genuine Mitsu cooler?
The Plazmaman kit I'm running is the Plazmaman GSR kit made to suit a larger front mount.
The piping differs to the standard evo piping.
I think I'll need a 550x180 roughly.

My bad mate,
thought you went for the Evo Piping kit as per:
http://www.plazmaman.com/shop/index.php?action=item&itemId=168
which is a standard replacement.
what sort of route does the GSR kit take?
have you fitted it up for measurements?

 

[JSTYLE]

i have a 450 x 300 x 76mm one at my parents place. (2 1/2' inlet/outlet)
Shiny chrome bar and plate.
just a tad bigger then stock and about 1 1/2 times thicker.

Jon

 

[Richard]

Pics of mine:

 

[evopwr]

just go ebay mate! i picked up a massive cooler (originally from JustJap) for $150!

 

[dkGSR]

all good now guys I've found one.
hopefully it gets here by the w/e as its coming from NSW.
thanks.