FS: OS GIKEN TWIN PLATE clutch setup (6bolt 4g63 AWD)

4GTuner

Help Support 4GTuner:

bazeng

Gday maaaate
Joined
Apr 2, 2005
Messages
9,899
Location
Melbourne
Hi Guys!

I have an OS GIKEN twin plate clutch for sale.
RRP is over $2400.00 from OTOMOTO

Its practically new, I had it measured and its about 4thou used. The flywheel and pressure plate has been balanced and dowled in 3 spots. It's to suit a 6bolt. The dowel for the crank has been drilled (didn't have one originally).

Pressure plate is rated at 2500lbs so its not as harsh as the heavy single plates (some are over 3000lbs). This will reduce the wear of the main thrust bearing in the block.

Clutch is rated at 600hp (larger than the normal 480hp type). This rating was given to me by an os giken supplier in VIC. The discs can be changed to tilton discs and will increase the hp rating significantly.

Micks motorsport is using this type of clutch with different discs. I also believe morpowa is using this type also.

Solid discs, not sprung, but full faced designed for street driving.

-------------

Location: VIC

Price: $1000.00 ono

Can have it cryo'd for an additional cost.

Willing to trade. Just bought a house! Anything house related!
 
Micks motorsport is using this type of clutch with different discs
Not in the race car anymore.

I have one in my car (sprung centre and uprated clutch plates though), and it's an awesome bit of gear. It drives better than the old exedy sprung centred single plate (the one meek sells), and takes a hell of a lot of punishment. Mine has taken 20k kms of abuse with 400+ hp atw without complaint.

Anyone who wants to make a bit of power should snap this up - you can't go wrong for the price.
 
Back
Top