FS TD05H-60/1

4GTuner

Help Support 4GTuner:

ted

Well-Known Member
Joined
Feb 17, 2009
Messages
1,670
Location
Wodonga VIC
Hi all,

Im selling my Kinugawa TD05H-60/1 due to going a different route with engines and have another turbo for the application.
The turbo has been fitted to my car and run for a total of 2 minutes absolutely no bullshit. There is a few little grubby finger marks
on the compressor housing and small scratches on the back of the compressor housing from where i took the circlip out to clock the
housing. Doesnt come with dump pipe or o2 sensor. Turbo is virtually new.

Im chasing 900 ono posted anywhere is aus.
Located north east vic.

UmGxD8B.jpg
 
Yes Jamo sorry should've added that ive had it bolted onto the 7 bolt sohc engine and it just touches the water pipe.

Next step up from a 20g from what i understand
 
I think it ended up fitting on the 93 with the stock manifold. The 6boost was mounting it too low from memory?
 
Looks to be fitted in the pic, not sure on the size differences to a 16g but I have a 3 inch anti surge cover on my 16g on my 93t and it clears with a fair bit of room around it.
 
You're on the money Vince it has a stock position exhaust housing and dump pipe on a stock manifold, the compressor housing clears the block by a few mm
 

Latest posts

Back
Top