FS: [WA] 3000GT front calipers and E1-3 brackets

[ascent]

I have a used pair of 3000GT front calipers, and two sets of adaptor brackets made to mount them on an evo 1-3.

Brackets were made by a guy on NZMMC about 5-6 years ago, and have patiently waited in my shed since.

No strawberries left in box.

ON HOLD

Located in Perth, WA.

 

[4piknup]

hi, what thickness are the adapter plates, and what is the bolt spacing on the mitsi calipers?
and they suit the 297mm rotors?

 

[EVOCPE]

Whats the minimal wheel size needed to clear the calipers?

 

[ascent]

I believe that the adaptor brackets were designed for 296mm discs, and 17" wheels. Obviously the offset and design of your rims will determine if they fit.

I have not fitted them to my lancer, so I can't confirm.

Will measure the thickness of the brackets in the morning.

 

[4piknup]

any chance of engineering them over here requires that they have engaging thread deeper than the thickness of the bolts.
ie, if the bolts are 12mm, you need 12mm of thread minimum. could maybe weld threaded boss on the rear if tooo small.

18x7 +45 like mine will be a breeze

 

[EV0300]

How much for a set of brackets?

 

[ascent]

Brackets are 8mm thick steel, laser cut.

 

[ascent]

updates to the original post.

 

[eternazr]

$300 the lot.

Hi Mate , would these brackets suit an E39 galant, if i am rite the lancer shares a simular front hub assembley?, cheers.

 

[ascent]

I have no idea, sorry.

I'm waiting for funds to appear to confirm a deposit. Once the funds come through, then they will be on hold.

 

[ascent]

On hold, deposit taken.