GSR anti-lift kit

[EIII]

I bought an anti lift / caster kit from Whiteline 12 months ago not knowing E3 was different to GSR. (having said that, Whiteline list the part as being OK for a CE9A!)

SO, brand new in packet including white grease, only opened long enough to get under it and see I was a dickhead.

As seen here: HERE

One of the best mods, I did it to my GSR years ago, also the 3 with the Super Pro kit.. Keeps it nice and flat on launch..

~ $70 + postage


Perth.

edit: beer fingers

 

[mymidlifecrisis]

Hey buddy,

It's way past beer o clock for me so I'm a little confused as to what this fits. So- if it fits an evo 3 I'll take it. If not, I'll tootle off to bed.

Cheers Dean

I bought an anti lift / caster kit from Whiteline 12 months ago not knowing E3 was different to GSR. (having said that, Whiteline list the part as being OK for a CE9A!)

SO, brand new in packet including white grease, only opened long enough to get under it and see I was a dickhead.

As seen here: HERE

One of the best mods, I did it to my GSR years ago, also the 3 with the Super Pro kit.. Keeps it nice and flat on launch..

~ $70 + postage


Perth.

edit: beer fingers

 

[EIII]

Mate it's for a GSR / EVO 1.

Evo 3 has a metal sleeve / bush around it.

 

[moi]

Are your whiteline antilift caster bushes yellow Square/Rectangular urethane blocks? If so that is completely incorrect for a GSR/EVO 1 as well. I ran into this problem and was explained to me by Pedders that the part was incorrectly shown. GSR + EVO 1/2/3 run metal bracket & casing around the bush - Front control arm rear bushes (caster). I cannot get a refund as I have had these bushes for about 2 years but never got around to even fitting them doh. Not to mention I forgot where the receipts are etc. If you look at the website and compare GSR with EVO III it shows exactly the same bushes (correct ones this time). http://www.whiteline.com.au/Plus/search.php

 

[EIII]

I fitted the same square urethane blocks to my 92 GSR a loooong time ago, (about 11 years ago?) I remember they needed no pushing into any bushings so not sure why you have them as different?
I went to Pedders once, he was going to set my Evo 3 suspension up up just like his RX7 race car - coz they were the same (ie both track cars) ..

My memory is shite, but I don't think it's that bad.... It fitted up into the recess in the chassis (even has the nipple to locate it), I smothered the whole thing in white grease, took bugger all time to do.

Just like this:

 

[DOUGMO]

Are your whiteline antilift caster bushes yellow Square/Rectangular urethane blocks? If so that is completely incorrect for a GSR/EVO 1 as well. I ran into this problem and was explained to me by Pedders that the part was incorrectly shown. GSR + EVO 1/2/3 run metal bracket & casing around the bush - Front control arm rear bushes (caster). I cannot get a refund as I have had these bushes for about 2 years but never got around to even fitting them doh. Not to mention I forgot where the receipts are etc. If you look at the website and compare GSR with EVO III it shows exactly the same bushes (correct ones this time). http://www.whiteline...Plus/search.php

moi

the square block is correct for gsr/evo 1 as pictured above. There listing is 100% incorrect if it says gsr-evo 3 are the same

but evo 2/6 do run the same sleved bush

 

[moi]

hmm I wonder what happened to mine then, mine has the sleeved bush and so I was not able to use the yellow whiteline bush kit as pictured. somehow evo 2 sleeved bushes got fitted to mine? I can only go off information given by pedders/whiteline.

 

[4piknup]

what are we saying?
if you have the metal sleeved bush in the front of the arm, you cant use the yellow blocks?
is this because they are more rigid than the other front bushes?

 

[EIII]

What we are saying is, as per my original post - this is an anti-lift kit for a GSR / EVO 1 for sale.

If you wish to discuss the intricacies of the Whiteline product catalogue and what part numbers reference what bushes and how they all work then start a thread, in the tech section!

 

[4piknup]

What we are saying is, as per my original post - this is an anti-lift kit for a GSR / EVO 1 for sale.

If you wish to discuss the intricacies of the Whiteline product catalogue and what part numbers reference what bushes and how they all work then start a thread, in the tech section!

well if its like that, i wont even look under the jumbuck to see if it might suit.
good luck with sale