Installing EVO3 mirrors to a GSR

[yld-gsr]

Ive got some EVO fold in mirrors to fit to my GSR.
I have a heap of wiring, but as to no clue where to even begin.

Does anyone have an EVO1/2/3 Wiring diagram or has any of the GSR owners done the conversion before?

Hoping these wont just sit in storage. Would really like to get them in.
I have the following:
the 2 Mirrors
the switch (with the fold-in option)
and wiring from the Mirors to ???

Im missing the wiring from the switch to ???

 

[JETGSR]

You know they spend 99.999999% of there life sitting out.

It would be a very simple circuit you could nut it out in about 10 mins

I will think about it for you!

just tell me how many wires are there OUT of the mirror(motor) and what colours they are. and how many wires out of the switch and what colours they are?

It would be easyer if you just used a standard DPDT switch but we see that you give me!

JETGSR

 

[EVO-00X]

GSR use a 3 wire setup, EVO's use a 5 wire setup. It's pretty easy to install actually as I did it to my coupe. I wrote it somewhere in a Word doc so I'll see if I can find it for you. :wink:

 

[yld-gsr]

yeah, i guess i just want the lil nice things of an EVO.
also, my parking spot is tight..

 

[EVO-00X]

Dude, look in your email

 

[yld-gsr]

big thanks!
big big thanks!

 

[yld-gsr]

ok. ive been workin on these fold in mirrors for a while now.
but finally had the time to get them almost installed.

ive got the mirrors phyiscally installed on my car.
i can control the direction of mirror like normal,
but i still cant fold them in yet...

there are 4 wires.
1 - 2-
3 - 4-

1 and 2 are for the 2 wires that run from the actual mirrors themselves.
the bottom 2 (3 and 4) i dont know what they are supposed to do.

im guessing some kind of power or something, but because im not using the EVO loom, i will need to piggy back this off something else.

ideas?

 

[Sk8er_Square]

Rob ya still got that word doc? send to me plz :wink: