Needed 1.8 GSR new turbo

[Skineo73]

Done a seal on the old turbo puffs of white smoke and oil flicked around the engine bay.

Need a new or secondhand Vr4 or Evo 3/ TD04 turbo or a turbo which bolts on with a min of fuss.

Links or information on where I can find one would be great.

Note it must fit a 4g93 1.8 gsr

 

[mattrat]

got vr4 14b here, pm me if interested

 

[Skineo73]

Is that a td05? 14b

 

[FLIBYUGSR]

theres an evo 3 one for sale just below your add?

there a driect bolt on im sure?

more power too!!!!

 

[JSTYLE]

theres an evo 3 one for sale just below your add?

there a driect bolt on im sure?

more power too!!!!

all TD05H series turbo onto a GSR arent direct bolt on..

Water lines and oil feed are different.. dump pipe is different.. j pipe from the turbo is dif.

Jon

 

[GSRSOL]

theres an evo 3 one for sale just below your add?

there a driect bolt on im sure?

more power too!!!!

all TD05H series turbo onto a GSR arent direct bolt on..

Water lines and oil feed are different.. dump pipe is different.. j pipe from the turbo is dif.

Jon

and you need to port the gsr manifold

 

[FLIBYUGSR]

oooo my bad soz

 

[doommachine]

I have a TD04, I have ported the inlet though, so worst case is you'll have to dremel your exhaust manifold.. should be fine though. 100 bucks + shipping and it's yours.

 

[JSTYLE]

theres an evo 3 one for sale just below your add?

there a driect bolt on im sure?

more power too!!!!

all TD05H series turbo onto a GSR arent direct bolt on..

Water lines and oil feed are different.. dump pipe is different.. j pipe from the turbo is dif.

Jon

and you need to port the gsr manifold

You dont actually need to port it.. it does bol on however it is very much recommended that you do it!!!!!! cos it is a big restriction in flow.

Jon

 

[Skineo73]

So the TD05 off a evo 3 will bolt on to my exhast manfold then?

Changing the oil feeder lines and dump to match the exhaust is not a problem it's the exhaust manafold I don't want to play with + in the gsr the oil filter sits just to the right of the turbo a turbo to big will burn holes in the oil filter :cry:

 

[GSRSOL]

you can port the exhaust manifold yourself. Its easy done

 

[Skineo73]

Ah is this where it feeds into the top of the turbo?

 

[3zercrowd]

Come and see me tomorrow Simon...Um today like after 10 or something...Ring/msn me

 

[Liberoz]

Done a seal on the old turbo puffs of white smoke and oil flicked around the engine bay.

Need a new or secondhand Vr4 or Evo 3/ TD04 turbo or a turbo which bolts on with a min of fuss.

Links or information on where I can find one would be great.

Note it must fit a 4g93 1.8 gsr

I've got my old turbo and manifold off my gsr jspec donk specs are

Manifold: ported and polished to match new gt pumps evo3 exhaust housing, also ceramic coated in silver by competition coatings
Turbo: is a low kms 98,000 TD05 14b off a Galant vr4 was rebuilt with new seals and gt pumps new EvoIII exhaust housing.
*Usage on both items was 17,000kms when 4g93t was pulled for 4g63t engine.
Condition: never over boosted .6bar ran for its life after rebuild, never blew oil or smoke.
Reason for Sale: upgraded to 4g63t and pulled off motor after buyer made EOI and never came to pick it up.

**If you want a total upgraded bolt on 14b td05 this is it

Located Sydney can post. shoot me a PM for any more details your after ect.