Only got indicators on one side

4GTuner

Help Support 4GTuner:

Parabola

Well-Known Member
Joined
Jul 4, 2010
Messages
192
Location
Brisbane
As the topic states, I've only got indicators on the passenger side (kinda)
The hazards don't work, indicators don't work. But when I lock the car the indicators flash only on the passenger side, not all the way around like they used to.
Fuses are all good.
I've changed out the hazard switch and still nothing.
Did notice last night, the drivers side indicator arrow on the cluster was very dull, but not the passenger side.
Any thoughts?
 
Ok found the flasher relay (thanks Ben) removed the relay,locked the car and still the passenger side indicators flashed without the relay installed.
Just checked more wiring under the dash & found 2 10amp fuses on the alarm loom that had blown. Replaced them, they continued to blow untill I upped the amperage to 30amps (I know, not a good thing to do). After doing this I was able to get my drivers side indicators to flash, but only again only when locking the car.
I still have no indicators or hazards:(
 
Problem solvered.
Flasher relay.
Still going to get the alarm either rewired or removed though.
good thing I didn't have any marshmallows Last night or I would have torched it. :)
 

Latest posts

Back
Top