pvc bov leak

[cairns d j]

hi have gsr with evo1 engine.fitted turbotech mbc,3" full system and still wont give any more than 7psi. worked out
stock pvc bov was leaking.there is another one on the car
[hks with vacum hose off it,not ajustable thow].
?took pvc one off and blocked. hks one still working fine
?is this ok only going to 15psi
?would it be good idea to fit evo8 mr bov also and where
can i get one from.how much?
reading this forum the evo8 mr bov [good for 25psi]
looks the same and
will fit.becouse at the moment i have d sized battary
blocking the 2 holes.will fit welse plugs if blocking.

thanks for help darryl

ps now that i have 15psi its a new car.very imprest

 

[ONPSI]

you can get the Evo 8 MR BOV from meek.com.au $220 if i am right..

 

[CLuTZ]

Hey, welcome to the club. Could you please put your location in your profile as per forum rules....

Your post is a little hard to decipher- some grammar goes a long way!

From what I gather, you replaced the stock B.O.V with an HKS one and now its running ok? Like what ONPSI said, you can get MR blow off valves from www.meek.com.au


dre

 

[bazeng]

You should be fine with the HKS one only.

Just block those holes off and you'll get away with any surge issues.
Otherwise, yes the 8MR is an ideal bov.

Turbosmart / plazmaman bovs also fit in the stock location (plumback)

 

[cairns d j]

thanks for good answer.
Will block off properly
someone said to put leaking bov in but backwards.which will give same resolt as blocking off.
no forgetting i have hks bov in the system as well.
thanks again darryl

 

[Dean]

No, putting your BOV on backwards is no good at all.
either HKS + block off, or get a plumback.