Rear lower arm bush's

[cheeks]

The bolts in 3 out of 4 of the bushings on my rear lower suspension arms are seized in the bushes. It might just be easier to replace the bush's themselves. Has anyone replaced these and how much will I be looking at if I have to do all four?

 

[deviantek]

You mean the rear lower control arm? If so, yes I replaced the two rears with superpro bushes. The fit was not 100%, but a local shop was able to do a little fabrication and made them work, even reinforced the control arm with some welded plates while they were at it.

 

[Liberoz]

The bolts in 3 out of 4 of the bushings on my rear lower suspension arms are seized in the bushes. It might just be easier to replace the bush's themselves. Has anyone replaced these and how much will I be looking at if I have to do all four?

Patients WD40 and the right tools to support the sleeve that the bolt goes through and a good sized hammer will always sort them out , Ive dont probably a Dozen just allow pleanty of soaking time for the WD40 to get in there and use the right tools for the job.